LC-50LE761K (serv.man2) - Sharp TV User Guide / Operation Manual. Page 4

Read Sharp LC-50LE761K (serv.man2) User Guide / Operation Manual online

English   - 3 -
•  To prevent fire, never place any type of candle or naked 
flames on the top or near the TV set.
•  To prevent fire or shock hazard, do not place the AC cord 
under the TV set or other heavy items.
•  Headphones—Do not set the volume at a high level. 
Hearing experts advise against extended listening at high 
volume levels.
•  Do not display a still picture for a long time, as this could 
cause an afterimage to remain.
•  There is power consumption always if main plug is 
connected.
• 
 Servicing—Do not attempt to service the product 
yourself. Removing covers can expose you to high voltage 
and other dangerous conditions. Request a qualified person 
to perform servicing.
LCD Screen
The LCD panel is a very high technology product, giving you 
fine picture details.
Due to the very large number of pixels, occasionally a few 
non-active pixels may appear on the screen as a fixed point 
of blue, green or red. This is within product specifications and 
does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto 
the speakers. Be sure to always carry the TV by two people 
holding it with two hands—one hand on each side of the TV.
WARNING
To prevent the spread of fire, keep 
candles or other open flames away from 
this product at all times.
Power Source
The TV set should be operated only from a 220-240V AC, 
50Hz outlet. Ensure that you select the correct voltage setting 
for your convenience.
Do not place the set, a piece of furniture, etc. on the power 
cord (mains lead) or pinch the cord.
Power Cord
Handle the power cord by the plug. Do not unplug the 
appliance by pulling from the power cord and never touch the 
power cord with wet hands as this could cause a short circuit 
or electric shock. Never make a knot in the cord or tie it with 
other cords. The power cords should be placed in such a way 
that they are not likely to be stepped on. A damaged power 
cord can cause fire or give you an electric shock. When it is 
damaged and needs to be replaced, it should be done by 
qualified personnel.
Lightning
In case of storm and lightning or when going on holiday, 
disconnect the power cord from the wall outlet. 
Replacement Parts
When replacement parts are required, make sure that the 
service technician has used replacement parts, which are 
specified by the manufacturer or have the same specifications 
as the original one. Unauthorized substitutions may result in 
fire, electrical shock or other hazards.  
Waste Disposal
•  Packaging and packaging aids are recyclable and should 
principally be recycled. Packaging materials, such as a foil 
bag should be kept away from children 
•  Batteries, including those which are heavy metal free, 
should not be disposed of with household waste. Please 
dispose of used batteries in an environmentally friendly 
manner. Find out about the legal regulations which apply 
in your area. 
•  Do not try to recharge batteries, there is a danger of 
explosion. Replace batteries only with the same or 
equivalent type.
•  Batteries should not be exposed to excessive heat such as 
sunshine, fire or the like.
This symbol on the product or on its packaging 
means that your electrical and electronic device 
should be disposed at the end of its service life 
separately from your household wastes. There 
are separate collection systems for recycling in 
the EU. For more information, please contact 
the local authority or the dealer where you 
purchased the product.
Disconnecting the Device
The mains plug is used to disconnect the TV set from the 
mains and therefore it must remain readily operable.
Installation
To prevent injury, this device must be securely attached to 
the wall in accordance with the installation instructions when 
mounted to the wall (if the option is available).
Warning
Do not leave your TV in standby or operating mode when 
you leave your house.
Connection to a Television Distribution System 
(Cable TV etc.) from Tuner
Device connected to the protective earthing of the building 
installation through the mains connection or through other 
apparatus with a connection to protective earthing-and to 
a television distribution system using coaxial cable, may in 
some circumstances create a fire hazard.
Connection to a cable distribution system has therefore to 
be provided through a device providing electrical isolation 
below a certain frequency range (galvanic isolator, see EN 
60728-11).
The Standby Off/On button doesn´t separate this device 
completely from mains. Moreover the device consumes power 
in the standby operation. In order to separate the device 
completely from mains, the mains plug has to be pulled from 
the mains socket. Because of that the device should be set 
up in a way, that an unobstructed access to mains socket is 
guaranteed, so that in case of emergency the mains plug can 
Page of 16
Display

Click on the first or last page to see other LC-50LE761K (serv.man2) service manuals if exist.