LC-50LE761K (serv.man2) - Sharp TV User Guide / Operation Manual. Page 5

Read Sharp LC-50LE761K (serv.man2) User Guide / Operation Manual online

English   - 4 -
be pulled immediately. To exclude the danger of fire, the power 
cord should principally be separated from the mains socket 
prior to a longer period of non-usage, i.e. during vacations.
Electrical device not in the hands of children
Never let children use any electrical device unsupervised. 
Children cannot always recognise possible dangers. Batteries 
/ accumulators can be life threatening when swallowed. 
Store batteries out of the reach of small children. In case 
of swallowing a battery medical aid has to be sought 
immediately. Also keep the packaging foils away from children 
as there is danger of suffocation.
Package Contents
TV
Remote Control
LED TV
Batteries: 2 X AAA
Quick Guide
1 X Video & Audio Connection 
Cable
3D Glasses
Nero media home CD
Note: You should check the accessories after purchasing. 
Make sure that each accessory is included.
As the manufacturer’s specification supports communication 
on cable lengths shall be smaller than 3m.
TV Control button & Operation
1.  Standby / On button
2.  TV/AV button
3.  Programme Up/Down buttons
4.  Volume Up/Down buttons
, switch is used for turning the TV on or off. 
The position of the control buttons and power switch may 
differ depending on the model.
Connect Power
IMPORTANT: The TV set is designed to operate on 220-240V 
AC, 50 Hz socket. After unpacking, allow the TV set to reach 
the ambient room temperature before you connect the set to 
the mains. Plug the power cable to the mains socket outlet.
Antenna/Cable/Satellite Connection
Connect the aerial or cable TV plug to the AERIAL INPUT 
(ANT.) or satellite lead to the SATELLITE INPUT(LNB) located 
on the rear side of the TV.
Rear side of the TV:
SATELLITE
AERIAL
CABLE
Note: Satellite support is depending on the model.
Installing The Batteries Into The Remote
•  Remove the back cover to reveal the battery compartment.
•  Insert two size AAA batteries. Note the correct polarity(+ 
or -). Do not mix old and new batteries. Replace only with 
same or equivalent type. 
•  Place the cover back on.
Switching On/Off
To Switch the TV On
Connect the power cord to the mains socket. Switch the “
” button on the TV to position “|” so the TV will switch to 
standby mode. Then the standby LED lights up.
To switch on the TV from standby mode either:
•  Press the “
” button, 
P+ / P- or a numeric button on the 
remote control.
•  Press the “
” or 
P/CH+/- button on the TV.
The TV will then switch on.
To Switch the TV to Standby
To switch the TV to low power standby press the “
” button 
on the remote control or on the TV.
To Switch the TV Off
Switch the “
” button on bottom of the TV to position 2 
as illustrated - “
”, to isolate the TV from the mains, the 
LED will go out.
Page of 16
Display

Click on the first or last page to see other LC-50LE761K (serv.man2) service manuals if exist.