Read Sharp LC-50LE761K (serv.man2) User Guide / Operation Manual online
English - 2 -
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable
(moulded) plug incorporating a 5A fuse. Should the fuse need
to be replaced, a BSI or ASTA approved BS 1362 fuse marked
ASA
or
and of the same rating as above, which is also
indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use
Always refit the fuse cover after replacing the fuse. Never use
the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not
In the unlikely event of the socket outlet in your home not
being compatible with the plug supplied, cut off the mains
plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the
DANGER:
The fuse from the cut-off plug should be removed and the
cut-off plug destroyed immediately and disposed of in a
safe manner.
Under no circumstances should the cut-off plug be inserted
Under no circumstances should the cut-off plug be inserted
elsewhere into a 5A socket outlet, as a serious electric shock
may occur.
To fit an appropriate plug to the mains lead, follow the
To fit an appropriate plug to the mains lead, follow the
instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with
IMPORTANT:
The wires in the mains lead are coloured in accordance with
the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product
may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
markings identifying the terminals in your plug, proceed as
follows:
• The wire which is coloured blue must be connected to the
• The wire which is coloured blue must be connected to the
plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the
plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected
to the earth terminal in your three pin plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same
as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead,
and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV
product. To ensure safety and many years of trouble-free
operation of your product, please read
Important safety
precautions carefully before using this product.
Important safety precautions
• Cleaning—Unplug the AC cord from the AC outlet before
cleaning the product. Use a damp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.
• Use a soft damp cloth to gently wipe the panel when it is
dirty. To protect the panel, do not use a chemical cloth to
clean it. Chemicals may cause damage or cracks in the
cabinet of the TV.
• Water and moisture—Do not use the product near water,
such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-
filled containers on this product. The
water may spill onto the product causing
fire or electric shock.
• To prevent any fault and unsafe situations,
please do not place any objects on top of the set.
• If any solid object or liquid falls into the cabinet, unplug the
TV and have it checked by qualified personnel before
operating it any further.
• Stand—Do not place the product on
an unstable cart, stand, tripod or table.
Doing so can cause the product to fall,
resulting in serious personal injuries as
well as damage to the product. Use only
a cart, stand, tripod, bracket or table
recommended by the manufacturer or
sold with the product. When mounting
the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended
by the manufacturer.
• When relocating the product placed on a cart, it must be
moved with utmost care. Sudden stops, excessive force
and uneven floor surface can cause the product to fall
from the cart.
• Ventilation—The vents and other openings in the cabinet
are designed for ventilation. Do not cover or block these
vents and openings since insufficient ventilation can cause
overheating and/or shorten the life of the product.
For
ventilation, leave a free space of at least 10 cm all around
the set.
Do not place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do
not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
• Use this device in moderate climates.
• The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not
to be injured by broken glass.
• Heat sources—Keep the product away
from heat sources such as radiators,
heaters, stoves and other heat-generating
products (including amplifiers).
Click on the first or last page to see other LC-50LE761K (serv.man2) service manuals if exist.