LC-50LE761K (serv.man2) - Sharp TV User Guide / Operation Manual. Page 9

English   - 8 -

Quick Settings menu allows you to access some options 

quickly. Press 

Q.MENU button on the remote control to view 

quick menu. This menu content may differ depending on the 

model of your TV.

“

”

 Teletext / Mix: Activates video text mode when pressed 

once (if available in your broadcast). Press again to view 

analogue teletext page. Press again to place the teletext 

screen over the programme (mix). Pressing again will quit 

the teletext mode. 

Some, but not all channels send information about the current 
and next programmes. Press the “

” button to view the 

EPG menu. 
You can Record or Set Timer after you have selected a 

programme in EPG menu.

Your TV supports recording of digital broadcasts. To do this 

a USB stroge device should be connected to the TV. The TV 

should be switched off while connecting the storage device. 

Then switch on the TV to enable recording feature.
The connected USB device should have at least 1 GB capacity 

and should have USB 2.0 compatibility. Otherwise an error 

message will be displayed.
If the writing speed of the connected USB disk is not 

sufficient,  recording  may  fail  and  timeshifting  feature  may 

not be available.
The files of the recorded programmes will not be available 

to be played on a computer. You can play the recordings 

only via your TV.
Lip Sync delay may occur during the timeshifting. 
The TV can record programmes up to ten hours.
Recorded programmes are split into 4GB partitions. 
Recordings of HD programmes can occupy bigger size on 

the USB disk depending on the broadcast’s resolution. For 

this reason it is recommended to use USB hard disk drives 

for recording HD programmes.
Do not plug out the USB/HDD during the recording. This may 

harm the connected USB/HDD.
Multipartiton support is available. Maximum two different 

partitions are supported. If the disk have more than two 

partitions, crash may occur.  First partition of the usb disk is 

used for PVR ready features. It also must be formatted as 

primary partition to be used for PVR ready features.
Some stream packets may not be recorded  because of signal 

problems, so sometimes video may freezes during playback. 
Record, Play, Pause, Display (for PlayListDialog) keys could 

not be used when teletext is ON. If a recording starts from 

timer when teletext is ON, teletext is automatically turned 

off. Also teletext usage is disabled when there is ongoing 

recording or playback. 

Press 

  (PAUSE) button while watching a broadcast for 

switching to timeshifting mode. In timeshifting mode, the 

programme is paused and simultaneously recorded to the 

connected USB disk. Press   (PLAY) button again to watch 

the paused programme from the stopped moment. You will 

see the timeshift gap between the real and the timeshifted 

programme in the info bar. 
Press the   (STOP) button to stop timeshift recording and 

return to the live broadcast.
Timeshift cannot be used while in radio mode.
You cannot use the timeshift fast reverse feature before 

advancing the playback with the fast forward option.

Press 

 (RECORD) button to start recording an event 

instantly while watching a programme. You can press 

 

(RECORD) button on the remote control again to record the 

next event on the EPG. In this case, OSD will display the 

programmed events for recording. Press   (STOP) button 

to cancel instant recording. Switching to a different broadcast 

or source; and viewing Media Browser are not available during 

the recording.

Press MENU button. Highlight 

Media Browser and press OK. 

Select 

Recordings Library item and press OK. Recordings 

Library screen will be displayed. Select a recorded item 

from the list (if previously recorded) and press 

OK to view 

Play Options. 
Press   (STOP) button to stop a playback and return to 

Recordings Library.

Select 

Recording Configuration item in the Settings menu 

to configure recording settings. 
Format Disk: You can use Format Disk feature for formatting 

the connected USB disk. 
IMPORTANT: Note that ALL the data stored on the USB disk 

will be lost and then the disk format will be converted to FAT32 

if you activate this feature. If your USB disk malfunctions, you 

can try formatting the USB disk. In most cases formatting the 

USB disk will restore normal operation; however, ALL the data 

stored on the USB disk will be lost in such a case. 

Connectivity feature allows the TV to connect to the home 

network wired or wirelessly. You can use this networking 

system to connect to the Internet Portal or to access photo, 

video  and  audio  files  that  are  stored  on  a  media  server 

connected to the network and play/display them on the TV. 
Wired connection
Connect the TV to the modem/router via a LAN cable (not 

supplied). Select 

Network Type as Wired Device in Network 

Settings menu and press OK to connect.