Read Sharp XG-P25XE (serv.man32) User Guide / Operation Manual online
E-30
Setup & Connections
Rear Projection
• Place a translucent screen between the projector and
the audience.
projected image. (See page
51
for use of this
function.)
• Optimal image quality can be achieved when the projector
is positioned perpendicular to the screen with all feet flat
and level.
and level.
Projection Using a Mirror
• When the distance between the projector and screen
is not sufficient for normal rear projection, you can
use a mirror to reflect the image onto the screen.
use a mirror to reflect the image onto the screen.
• Place a mirror (normal flat type) in front of the lens.
• Project the normal image onto the mirror.
• The image reflected from the mirror is projected onto
• Project the normal image onto the mirror.
• The image reflected from the mirror is projected onto
the translucent screen.
CAUTION
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
eyes of the audience.
• It is recommended that you use the optional Sharp
ceiling-mount bracket for this installation.
• Before mounting the projector, contact your nearest
Sharp Authorized LCD Projector Dealer or Service
Center to obtain the recommended ceiling-mount
bracket (sold separately). (AN-XGCM61 ceiling-mount
bracket and its AN-EP101AP extension tube (for
U.S.A.), or AN-NV6T ceiling-mount bracket and its AN-
TK201/AN-TK202 extension tubes (for countries other
than the U.S.A.))
Center to obtain the recommended ceiling-mount
bracket (sold separately). (AN-XGCM61 ceiling-mount
bracket and its AN-EP101AP extension tube (for
U.S.A.), or AN-NV6T ceiling-mount bracket and its AN-
TK201/AN-TK202 extension tubes (for countries other
than the U.S.A.))
• When the projector is in the inverted position, use the
upper edge of the screen as the base line.
appropriate projection mode. (See page
51
for use
of this function.)
Ceiling-mount Projection
Image Projection
