XG-P25XE (serv.man28). Lamp Installation - Sharp Projector User Guide / Operation Manual

xg-p25xe (serv.man28) user guide / operation manual
Model
XG-P25XE (serv.man28)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
315.25 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Projector / Lamp Installation
File
xg-p25xe-sm28.pdf
Date

Read Sharp XG-P25XE (serv.man28) User Guide / Operation Manual online

INSTALLATION MANUAL
CAUTION:
• Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized LCD Projector Dealer or Service Center* for a replacement.
• Do not remove the lamp cage directly after operation of the projector. The lamp may be extremely hot. Wait at least one hour after the power cord is disconnected to allow the surface of the lamp cage to
fully cool before removing the lamp cage.
It is recommended that the lamp be replaced after approximately 1,400 cumulative hours of use or when you notice a significant deterioration of the picture and color quality. Carefully change the lamp by following the steps below.
If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized LCD Projector Dealer or Service Center* for repair.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized LCD Projector Dealer or Service
Center*. For the name of the nearest Sharp Authorized LCD Projector Dealer or Service Center*, please call toll-free: 1-888-GO-SHARP (1-888-467-4277).
Hg LAMP CONTAINS MERCURY For State Lamp Disposal Information
www.lamprecycle.org or 1-800-BE-SHARP
U.S.A. ONLY
* Confirm the name of the Dealer or Service Center referring to your projector operation manual.
Removing and installing the lamp unit
Printed in Japan
TINS-B393WJZZ
04P06-JWM
• Reset the lamp timer only after replacing the lamp.
CAUTION
• Be sure to remove the lamp cage by the handle. Be sure not to touch the glass surface of the lamp cage or the inside of the projector.
• To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.
• Be sure to change the air filter during lamp replacement. The new air filter comes packaged with the lamp unit.
LAMP UNIT (LAMP/CAGE MODULE)
FOR LCD PROJECTOR
Model 
AN-P25LP
(BQC-XGP25X//1)
Resetting the lamp timer
1
Connect the power cord.
Plug the power
cord into the AC
socket of the
projector.
2
Reset the lamp timer.
While pressing ƒ,
©
 and ENTER on
the projector, press
POWER ON on
the projector.
“LAMP 0000H” is
displayed,
indicating that the
lamp timer is
reset.
1
Turn off the power.
2
Disconnect the power cord.
Unplug the power
cord from the AC
socket.
3
Remove the bottom filter
cover.
Turn over the
projector. Press the
tab and lift open
the filter cover in
the direction of the
arrow.
4
Remove the air filter.
5
Replace the new air filter.
Place the new
air filter
underneath the
tabs on the
filter frame.
6
Replace the filter cover.
Insert the tab on
the end of the filter
cover into the filter
cover opening and
press the filter
cover into position.
7
Remove the lamp cage cover.
8
Remove the lamp cage.
Remove the
securing screws
from the lamp
cage. Hold the
lamp cage by the
handle and pull it
towards you.
9
Insert the new lamp cage.
10
Attach the lamp cage cover.
Tab
Grasp the air filter
between your
fingers and lift it
out of the filter
cover.
Tab
Turn over the projector
and loosen the user
service screw that
secures the lamp cage
cover. Then slide the
cover in the direction
of the arrow.
User service screw
Press the lamp
cage firmly into
the lamp cage
compartment.
Fasten the
securing screws.
Slide the lamp
cage cover in the
direction of the
arrow. Then
tighten the user
service screw.
User service screw
Securing
screw
Securing
screws
Press POWER
OFF
. Wait until the
cooling fan stops.
AN-P25LP_Lamp_E.p65
04.5.11, 10:05 AM
1
Für Anweisungen in Ihrer Sprache siehe Benutzerhandbuch im PDF-For-
mat auf der mit dem Projektor mitgelieferten CD-ROM.
Sie können das PDF-Benutzerhandbuch auch aus dem Internet
herunterladen (http://sharp-world.com/products/index.html).
DEUTSCH
Pour des instructions dans votre langue, reportez-vous au mode d’emploi
PDF contenu dans le CD-ROM fourni avec le projecteur.
Vous pouvez également télécharger le mode d’emploi PDF d’Internet
(http://sharp-world.com/products/index.html).
FRANÇAIS
Para recibir instrucciones en su idioma, consulte el manual de manejo
PDF que se encuentra en el CD-ROM suministrado con el proyector.
También puede descargar el manual de manejo PDF de Internet
(http://sharp-world.com/products/index.html).
ESPAÑOL
Per ricevere istruzioni nella propria lingua, fare riferimento al manuale
d’uso in formato PDF incluso nel CD-ROM fornito con il proiettore.
È possibile, inoltre, scaricare lo stesso manuale d’uso da Internet dal sito
http://sharp-world.com/products/index.html .
ITALIANO
Voor aanwijzingen in uw taal verwijzen wij u naar de PDF-
gebruiksaanwijzing op de CD-ROM die bij de projector wordt geleverd.
U kunt de PDF-gebruiksaanwijzing ook vanaf internet downloaden
(http://sharp-world.com/products/index.html).
NEDERLANDS
Vi hänvisar till de PDF-filer som återfinns på den medföljande CD-ROM-
skivan för en bruksanvisning på önskat språk.
En bruksanvisning av formatet PDF kan också nerladdas från Internet
(http://sharp-world.com/products/index.html).
SVENSKA
Para instruções no seu idioma, consulte o manual de operação em PDF
contido no CD-ROM fornecido com o projetor.
Pode-se também baixar o manual de operação em PDF pela internet
(http://sharp-world.com/products/index.html).
PORTUGUÊS
LampManualXR1S
04.4.23, 2:29 PM
4-5
Page of 2
Display

Download Sharp XG-P25XE (serv.man28) User Guide / Operation Manual

Here you can read online and download Sharp XG-P25XE (serv.man28) User Guide / Operation Manual in PDF. XG-P25XE (serv.man28) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp XG-P25XE (serv.man28) Projector. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.