XG-P25XE (serv.man32). Setup connections - Sharp Projector User Guide / Operation Manual. Page 7

Read Sharp XG-P25XE (serv.man32) User Guide / Operation Manual online

E-22
Setup & Connections
Power ON/OFF
Press POWER ON.
Press POWER OFF.
On-screen Display
• The blinking green LAMP REPLACEMENT indicator
shows that the lamp is warming up. Wait until the
indicator stops blinking before operating the projector.
• If the power is turned off and then immediately turned
on again, it may take a short while before the lamp
turns on.
• After the projector is unpacked and turned on for the first
time, a slight odor may be emitted from the exhaust vent.
This odor will soon disappear with use.
Press  POWER OFF again while the message is
displayed to turn off the power.
• If you accidentally pressed POWER OFF and do not want
to turn off the power, wait until the power off screen
disappears.
• When the power is turned off, the POWER indicator will light
up red and the cooling fan will run for about 90 seconds.
The projector will then enter standby mode.
• Wait until the cooling fan stops before disconnecting the
power cord.
• The power can be turned on again by pressing POWER
ON. When the power is turned on, the POWER indicator
and the LAMP REPLACEMENT indicator light green.
• The POWER indicator blinks if the bottom filter cover is not
securely installed.
When the power is on, the LAMP REPLACEMENT
indicator lights, indicating the status of the lamp.
Green: Lamp is ready.
Green blinking: Warming up.
Red: Change the lamp.
WARNING:
The cooling fan in this projector continues to run for
about 90 seconds after the projector is turned off.
During normal operation, when turning the power off
always use the POWER OFF button on the projector or
on the remote control. Ensure the cooling fan has
stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE
PROJECTOR OFF BY DISCONNECTING THE POWER
CORD. FAILURE TO OBSERVE THIS WILL RESULT IN
PREMATURE LAMP FAILURE.
Projector
Remote control
ON/OFF
LAMP REPLACEMENT
indicator
Page of 15
Display

Click on the first or last page to see other XG-P25XE (serv.man32) service manuals if exist.