Read Sharp PAS (serv.man3) Service Manual online
PageCounter Administrator Guide Page
61
7. Select
the
Devices option by pressing the corresponding number key from
the keypad.
8. From the Devices menu, select Device1 by pressing the corresponding
number key from the keypad.
9. Proceed to perform the fax device AutoDetect by turning the Bypass key
OFF and then selecting the Fax Autodetect option from the display by
pressing the corresponding number key from the keypad.
pressing the corresponding number key from the keypad.
Make sure that all connections between the PageCounter fax terminal
and the fax device are in place. Also ensure that the fax device is
connected to the analog phone line, and the fax is powered on).
and the fax device are in place. Also ensure that the fax device is
connected to the analog phone line, and the fax is powered on).
10. To begin the detection process, place a single sheet of paper in the fax
device and dial 123# then press <START>. A series of beeps will be
heard and once the PageCounter terminal has detected the fax device type
(V.34 or Non V.34) the following acknowledgement will be displayed on
screen:
heard and once the PageCounter terminal has detected the fax device type
(V.34 or Non V.34) the following acknowledgement will be displayed on
screen:
11. After the fax device AutoDetect procedure has been completed, verify that
the correct V.34 or Non-V.34 message shows in the display:
Non-V.34 Fax Machine
or
V.34 Fax Machine
Once your PageCounter terminal has detected the proper fax type, you can send and
receive faxes through the terminal as detailed in the following sections.
receive faxes through the terminal as detailed in the following sections.
Fax Data Entry Methods
There are three methods of data entry for sending fax transmissions with a
PageCounter terminal:
PageCounter terminal:
• Terminal Data Entry - Entering data at the terminal allows use of all terminal
features but excludes use of fax machine features. The terminal accepts Alpha and
numeric entries.
numeric entries.
• Fax Machine (Touch Tone) Data Entry - Entering data at the fax machine
allows use of fax machine features but excludes use of terminal features (for
example: Search or Recall). Fax machines can only accept numeric characters, the
<#>, and the <*> key.
example: Search or Recall). Fax machines can only accept numeric characters, the
<#>, and the <*> key.
• JobCode Entry - Creating a JobCode at the terminal and then using that code at
the fax machine allows you to use features of the terminal and the fax machine.
Click on the first or last page to see other PAS (serv.man3) service manuals if exist.