Read Sharp PAS (serv.man3) Service Manual online
Page 60
PageCounter Administrator Guide
Appendix B: Set
Up PageCounter Fax Control
When PageCounter is configured for Mode 1 communication, you can monitor
and manage your fax transaction needs.
Installing PageCounter as a Fax Terminal
When you configure the PageCounter terminal for Mode 1 communication, the
terminal supports fax control. Before sending or receiving faxes with your
PageCounter terminal, you must properly install the terminal, set the terminal to
Mode 1 communication, and activate the terminal AutoDetect feature to determine
whether the fax device is a V.34 or Non V.34 device.
terminal supports fax control. Before sending or receiving faxes with your
PageCounter terminal, you must properly install the terminal, set the terminal to
Mode 1 communication, and activate the terminal AutoDetect feature to determine
whether the fax device is a V.34 or Non V.34 device.
Only fax machines complying with the attachment requirements of the
network operator/regulator may be connected to the PageCounter
terminal.
network operator/regulator may be connected to the PageCounter
terminal.
Perform the following steps to properly install the terminal.
1. Make sure the terminal is powered down.
2. Boot up the terminal and wait for the Idle Mode Screen to appear:
3. Connect PageCounter terminal to the V.34 or Non V.34 fax unit.
To enable the fax device AutoDetect Mode at the PageCounter terminal, perform the
following:
following:
1. Turn the Bypass key to the “ON” position.
2. Press the <END> key and the <F2> Function key together. At the prompt,
enter the Manager Mode password or "Q" (the default password that can
be changed by the system administrator).
be changed by the system administrator).
3. From the Manager Mode menu, select the Network option by pressing the
corresponding number key from the keypad.
4. Select
the
Set Control System option by pressing the corresponding
number key from the keypad.
5. Select
the
0:Mode 1 option to configure the terminal for Mode 1
communication and fax control.
6. Select
the
BACK option to return to the main Manager Mode menu.
Click on the first or last page to see other PAS (serv.man3) service manuals if exist.