Read Sharp PAS (serv.man3) Service Manual online
Page 58
PageCounter Administrator Guide
Appendix A: Using SmartPrompts
The PageCounter utilizes SmartPrompts, which allow the terminal to be
configured for specific needs.
SmartPrompt Criteria
SmartPrompt functionality is available when the terminal is configured for Mode 1
communication. SmartPrompt Criteria specify the type of information that must be
entered in a data entry field for the action to occur. For each terminal, you can
specify up to sixty-four criteria. All eight criteria can be used to build a single
SmartPrompt, or you can build multiple prompts for a terminal using one or more
criteria per prompt. Remember that for each terminal you can only use a total of eight
criteria.
communication. SmartPrompt Criteria specify the type of information that must be
entered in a data entry field for the action to occur. For each terminal, you can
specify up to sixty-four criteria. All eight criteria can be used to build a single
SmartPrompt, or you can build multiple prompts for a terminal using one or more
criteria per prompt. Remember that for each terminal you can only use a total of eight
criteria.
You can specify that a field entry must meet one or more of the following criteria:
• Must meet specific syntax requirements
• Must be a valid entry in a specific table
• Must exist in the Non-Billable Table
• Must have been verified Yes at the Verify Yes/No prompt
• Combined validation entry (with a previous field entry) must be a valid entry in a
• Must be a valid entry in a specific table
• Must exist in the Non-Billable Table
• Must have been verified Yes at the Verify Yes/No prompt
• Combined validation entry (with a previous field entry) must be a valid entry in a
specific table
• Is a credit transaction
• A flag is set
• A flag is set
Syntaxes that include the following codes do not work with the
PageCounter terminal: C, P, U,*, LT
PageCounter terminal: C, P, U,*, LT
If an additional data entry prompt appears while you are using the
terminal, you must enter the appropriate information in the field before
the terminal will proceed to the next field function.
terminal, you must enter the appropriate information in the field before
the terminal will proceed to the next field function.
When the PageCounter is connected to PrintLog Accounting Server
(PAS), the terminal does not support SmartPrompt functionality.
(PAS), the terminal does not support SmartPrompt functionality.
SmartPrompt Actions
When the field entry meets the specified criteria, the SmartPrompt can be used to
perform one or more of the following actions:
perform one or more of the following actions:
• Enable or disable specific fields
Click on the first or last page to see other PAS (serv.man3) service manuals if exist.