Read Sharp MX-PE10 FIERY (serv.man5) FAQ online
Print Notepads
EFI Educational Services
4
Create a Calibration Set
1. Select
Manage in the Calibration section.
2. Select
Create New… to create the new Calibration Set.
3. Begin by selecting an existing Calibration Set that is similar to the media you will be calibrating
and OK.
4. When prompted, name the new Calibration set.
5. Complete
the
Recommended Paper text box with the media that will be used to calibrate. This
can be left blank but it will make managing paper and media easier in the future.
6. To assign media properties such as paper size, Paper Weight and Coating required to print using
the desired media, select
Properties to open Job Properties.
a. Select the Media tab and assign the appropriate Media Type, Media Weight, Coating,
and Paper tray or Paper Catalog for your workflow.
b. Select
the
Image tab and
assign the Line/Dot type associated with this calibration set.
Each Line/Dot type will need to have a unique calibration set and output profile. Note:
these options will vary with device.
these options will vary with device.
Note:
Some print engines will require the media to be selected using the Paper Catalog.
7. OK to close the Job Properties window and select Continue.
8. Select
the
Paper Source that will be used to print the Calibration page.
9. Set the Measurement method to EFI ES-2000 or the measurement device you have connected
and select Continue.
10. The Calibration page will print using the Calibration Preferences and Job Properties. Retrieve
the printed page.
Click on the first or last page to see other MX-PE10 FIERY (serv.man5) service manuals if exist.