Read Sharp MX-PE10 FIERY (serv.man39) Technical Bulletin online
45124805
© 2014 Electronics For Imaging
20 January 2014
*45124805*
Addendum to the Fiery
®
Server MX-PE10
Installation and Service Guide
This document contains updates to the Fiery Server MX-PE10 Installation and Service Guide.
Read this document and store it with the Installation and Service Guide for future reference.
Read this document and store it with the Installation and Service Guide for future reference.
N
OTE
:
The term “Fiery Server” is used in this document to refer only to the Fiery Server
MX-PE10.
Installing system and user software
This topic provides clarification on the following:
• Fiery Server MX-PE10 Installation and Service Guide > System Software Installation >
Installing system software
Fiery Server system and user software is provided on the following media:
• System Software DVD—system software, version 1.1 for the Fiery Server.
When you install system software, use System Software DVD 1 with part # 45124526.
During the system software installation, use System Software DVD 2 (part # 45120171)
and System Software DVD 3 (part # 45120172) that came with the previous version of the
Fiery Server, version 1.0.
and System Software DVD 3 (part # 45120172) that came with the previous version of the
Fiery Server, version 1.0.
• User Software DVD, Utilities Package version 4.1—contains the Fiery Server user
software.
When you install user software, use the User Software DVD with part # 45124527.
Install system and user software in the following cases:
• The hard disk drive is replaced.
• The Fiery Server must be updated to a more recent version of the system software.
• The language used on the system must be changed.
Software installation takes approximately one hour (not including the time needed to
configure the Fiery Server).
configure the Fiery Server).
N
OTE
:
For this procedure, you can use both the Fiery Server control panel and the optional
keyboard and mouse to interact with the installer messages.
T
O
INSTALL
SYSTEM
SOFTWARE
1 Make sure that all USB storage devices and dongles have been removed from the Fiery Server.
2 If needed, insert System Software DVD 1 into the DVD drive and reboot the Fiery Server from
the control panel (or the Start menu, if a monitor is connected).
Allow the system to reboot. Do not press any buttons during this time.
Click on the first or last page to see other MX-PE10 FIERY (serv.man39) service manuals if exist.