Read Sharp MX-PE10 FIERY (serv.man39) Technical Bulletin online
7
System Software
System Software Installation
Please notes that Num Lock may be turned on after logging onto Windows right after system
software installation.
software installation.
Printing banner documents with custom paper sizes
When you print banner documents with custom paper sizes, you must load the paper on the
bypass tray and set the paper size in millimeters or inches.
bypass tray and set the paper size in millimeters or inches.
Banner documents with custom paper sizes only print if the unit of measurement in the
printer tray settings and in Printer Driver > Properties is the same. For example, if the unit in
the printer tray settings is inches, makes sure that the unit in Properties is also inches. If you
do not, the job does not print. The same is true for all other types of documents with custom
paper sizes.
printer tray settings and in Printer Driver > Properties is the same. For example, if the unit in
the printer tray settings is inches, makes sure that the unit in Properties is also inches. If you
do not, the job does not print. The same is true for all other types of documents with custom
paper sizes.
Example A
Before you print a banner document with 11.69 x 47 inch paper, do the following:
1 In the printer tray settings, make sure that the paper size for the bypass tray is
11 5/8 x 47 in.
2 In Printer Driver > Properties, make sure that the custom paper size is 11.62 x 47 in.
Alternatively, you can set the custom paper size in Command WorkStation > Job Properties.
Example B
If you decide you want to print the same job in millimeters, do the following:
1 In the printer tray settings, change the paper size for the bypass tray to 297 x 1194 mm.
2 In Printer Driver > Properties, change the custom paper size to 296.92 x 1193.8 mm.
T
O
PRINT
BANNER
DOCUMENTS
WITH
CUSTOM
PAPER
SIZES
1 Open the document and click File > Print.
2 Select the printer driver for the MFP and click Properties.
3 On the Media tab, under Paper Size, click the Custom button.
4 In the Custom Size window, enter the exact same paper size specified for the bypass tray in
the printer tray settings.
If the unit of measurement (mm or in.) is not the same, the job does not print.
5 Click OK.
6 Click Print.
Click on the first or last page to see other MX-PE10 FIERY (serv.man39) service manuals if exist.