MX-PE10 FIERY (serv.man39). RELEASE OF GM1.1 FOR EFI PRINT SERVER (MX-PE10) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 12

Read Sharp MX-PE10 FIERY (serv.man39) Technical Bulletin online

2
3 Select the language to use for this installation process. 
4 When the message appears warning that all the data will be erased, select Continue.
5 At the prompt, insert System Software DVD 2. When the installer prompts for the Windows 7 
product key, use the control panel or keyboard (if present) to enter the product key. 
• Use the control panel or keyboard (if present) to enter the product key. 
• Use a USB flash drive to enter the product key. Use the Notepad application or any text 
editor to create a text file that contains the product key as the first line, save this file as 
“windowskey.txt,” and place it in the root folder of the USB flash drive. When the installer 
prompts for the Windows 7 product key, attach the USB flash drive to one of the USB 
connector of the Fiery Server, and select the option to enter the product key from the USB 
flash drive.
Be sure to enter the product key labeled on the back side of the Fiery Server. Do not enter a 
temporary or trial version product key.
If you enter the wrong product key, you have to enter the product key provided with the 
Upgrade Kit to activate Windows after the installation procedure. To do this, click Start > 
Control Panel > System and Security > System, and then click Activate Windows now. Follow 
the on-screen instructions. 
6 At the prompt, insert System Software DVD 3.
If you used the USB flash drive to enter the Windows product key, remove the USB flash 
drive from the USB connector.
7 When prompted, insert the User Software DVD into the DVD drive. Wait for files to be copied 
to the Fiery Server.
During this segment, the following installations are performed:
• The entire contents of the User Software DVD are copied to a shared folder on the Fiery 
Server hard disk drive, in e:\efi\user_sw.
• User software is installed on the Fiery Server.
“Configuring OS registry and devices” and “Preparing System for first use” messages are 
displayed on the server as the installation of User Software continues. 
panel.
Set aside the DVDs and product key so that you can give them to the customer after the 
installation. 
9 If a monitor, mouse, and keyboard are present:
When the Log On to Windows dialog box appears on the monitor, type Fiery.1 in the 
password field, and then click OK. 
Type Fiery.1 exactly. The password is case-sensitive; for example, fiery.1 will not work.
Page of 12
Display

Download Sharp MX-PE10 FIERY (serv.man39) Technical Bulletin