MX-M850 (serv.man28). Details of Each Section - R Fan Filter Section - Sharp Copying Equipment Service Manual (repair manual). Page 7

MX-M1100  FAN, FILTER SECTION  R – 7

7)

Remove the screw (a), and remove the toner tray (b).

8)

Remove the screw (a), and remove the cover (b).

9)

Disconnect the connector (a), and remove the screw (b).
Remove the duct unit (c).

10) Remove the screw (a), and remove the duct (b).

11) Disconnect the connector (a), and remove the screw (b).

Remove the process cooling fan 2 (c), the process cooling fan
3 (d), and the process cooling fan 4 (e).
* When installing, be careful to arrange the fan so that the

direction of the arrow mark (f) on the duct and the arrow
mark (g) on the fan are same.

* Check to confirm that the resin part is engaged with the

notch of the fan. 

1)

Remove the left upper cabinet.

2)

Disconnect the connector (a). Remove the screw (b), and
remove the paper cooling fan (c).
* When installing, face the fan label (d) downward.
* Check to confirm that the resin part is engaged with the

notch of the fan.

 

a

a

a

a

a

a

b

a

b

a

a

b

b

c

b

a

a

a

a

a

c

d

e

a

b

b

b

g

f

a

c

d

b