Read Sharp MX-M850 (serv.man83) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
1. Model Name: MX-M850/M950/M1100
2.
Description: Upgrade of ICU and PCU-ROM
From February 2009 production
Destinatio
n
ROM
control
No.
ICU
(PROGRAM
)
ICU
(BOOT)
PCU SCU DSPF
IMAGE
DATA
OPU
P-CON
Except
for
China
and
Taiwan
E00
0204H0 0204H0 0109H0 0100H0 0100H0 0100H0 0100H0 0100H0
For China
D00
C204H0 C204H0 0109H0 0100H0 0100H0 0100H0 0100H0 0100H0
For
Taiwan
B00
A204H0 A204H0 0109H0 0100H0 0100H0 0100H0 0100H0 0100H0
* ICU BOOT above is the version described in the ROM management label. Check the
actual version (Sim22-5) :
- Except for China and Taiwan
ICU(BOOT) : 01.01.H0/LANGUAGE : 01.10.H0/GRAPHIC : 01.05.H0
- For China
ICU(BOOT) : 01.01.H0/LANGUAGE : C1.12.H0/GRAPHIC : 01.05.H0
- For Taiwan
ICU(BOOT) : 01.01.H0/LANGUAGE : A1.00.H0/GRAPHIC : 01.05.H0
Item of change: See the accompanying sheet.
ROM Version Combination History Table (Except for China and Taiwan)
No.
ROM
administration
ICU PCU SCU
DSPF
IMAGE
DATA
OPU
P-CON
Action
Issued
T/R No.
(7) D01 0201H0 0108H0 0100H0 0100H0 0100H0 0100H0 0100H0 2008/9
HRE-059
(6) D00 0201H0 0107H0 0100H0 0100H0 0100H0 0100H0 0100H0 2008/5
HRE-043R
(5) C01 0200H0 0106H0 0100H0 0100H0 0100H0 0100H0 0100H0 2007/12
HRE-027
(4) C00 0200H0 0105H0 0100H0 0100H0 0100H0 0100H0 0100H0 2007/11
HRE-019
(3) B01 0110H0 0105H0 0100H0 0100H0 0100H0 0100H0 0100H0
2007/10
Mid
(2) B00 0110H0 0104H0 0100H0 0100H0 0100H0 0100H0 0100H0
2007/9
Mid
HRE-017
(1) A11 0102H0 0103H0 0100H0 0100H0 0100H0 0100H0 0100H0
2007/6
Mid
HRE-002
ROM UPGRADE (8)
TECHNICAL BULLETIN
Date:
8
th
July 2009
Model:
MXM850/950/1100
Ref.:
30
Colour:
White
Page:
1 of 3
Sharp Electronics (UK) Ltd., Technical Services Group
[
Description]
No.
Subject Description
1 Copy
related
Fixed problem whereby an extra copy was output when Test Copy was
used at the same time as the Batch Copy feature.
used at the same time as the Batch Copy feature.
2
Recovery from
Power Save
Power Save
mode
Fixed problem whereby MFP would sometimes not recover from Sleep
mode if a print job was executed from a computer when the MFP was
in Sleep mode.
mode if a print job was executed from a computer when the MFP was
in Sleep mode.
3 Printer
related
Fixed problem whereby PostScript forms registered to hard disk were
not executed properly.
not executed properly.
4
Printer related
Fixed problem whereby paper output was switched to the top tray
partway through a job when continuously printing certain data with
the offset tray set as the output paper tray.
partway through a job when continuously printing certain data with
the offset tray set as the output paper tray.
5 Printer
related
Fixed problem whereby sheets were erroneously stapled individually
when printing and stapling certain multi-page jobs.
when printing and stapling certain multi-page jobs.
6 Printer
related
Fixed problem whereby the same data was sometimes printed
repeatedly every 90 seconds when the MFP was connected to a server
that was set to check MFP status using the PJL_USTATUS command.
repeatedly every 90 seconds when the MFP was connected to a server
that was set to check MFP status using the PJL_USTATUS command.
7 Printer
related
Fixed problem whereby MFP sometimes stopped when printing
continuous batch jobs from non-Windows environments.
continuous batch jobs from non-Windows environments.
8 Printer
related
Fixed problem whereby PCL fonts registered to hard drive could not
be printed properly.
be printed properly.
9 Printer
related
Fixed problem whereby command specifying number of copies did not
work in PCL 5.
work in PCL 5.
10 Printer
related
Fixed problem whereby printing speed with AppleTalk protocol was
slower than with LPR protocol.
slower than with LPR protocol.
11 Printer
related
Improved performance when printing data containing EPS files and/or
other image files using the PostScript driver.
other image files using the PostScript driver.
12 Printer
related
Fixed problem whereby lines per inch command (&l8D) did not work.
13 Printer
related
Fixed problem whereby jobs were not printed using the specified size
when paper size was specified with a PCL macro.
when paper size was specified with a PCL macro.
14 Printer
related
Fixed problem whereby a communication error occurred when FTP
Pull Print was used on FTP servers running on Novell NetWare 5.x.
Pull Print was used on FTP servers running on Novell NetWare 5.x.
15 Printer
related
Fixed problem whereby MFP hung at around 1,000 jobs when LPD
banner pages were enabled.
banner pages were enabled.
Sharp Electronics (UK) Ltd., Technical Services Group
No
.
Subject Description
16 Printer
related
Fixed problem whereby subsequent data was not accepted when a job
name containing illegal code was printed with LPR.
name containing illegal code was printed with LPR.
17 Printer
related
Fixed problem whereby MFP could not print from Night mode even if
fax software switch 154-2 was set to "1" when External Calculation
mode was not enabled in OSA.
fax software switch 154-2 was set to "1" when External Calculation
mode was not enabled in OSA.
18 Scanner
related
Fixed problem whereby CE-00 error sometimes occurred when using
Scan to SMB.
Scan to SMB.
19 Scanner
related
Fixed problem whereby it was sometimes not possible to use the Scan
to Shared Folder feature to scan to a shared folder on an RAS server.
to Shared Folder feature to scan to a shared folder on an RAS server.
20 Scanner
related
Fixed problem whereby the Scan to Shared Folder feature was
sometimes not available in certain file server environments.
sometimes not available in certain file server environments.
21 User administration
related
Fixed problem whereby external account servers were no longer
recognized if the OSA environment was used when the MFP was
connected to an EFI controller.
recognized if the OSA environment was used when the MFP was
connected to an EFI controller.
22 WEB page
related
Fixed problem whereby a 3000 error sometimes occurred when a user
attempted to save (to a computer) or delete data registered using the
Document Filing feature from the web page.
attempted to save (to a computer) or delete data registered using the
Document Filing feature from the web page.
23 WEB page
related
Fixed problem whereby default paper output tray would revert to the
top tray even if set to the offset tray under printer properties from the
web page when the MX-FNX6 was attached.
top tray even if set to the offset tray under printer properties from the
web page when the MX-FNX6 was attached.
24 Optional product
related
Fixed problem whereby product key for network scanner was enabled
if it was entered when the memory required in order to add an
additional network scanner was not installed.
if it was entered when the memory required in order to add an
additional network scanner was not installed.
25 Software switch
related
Added bits for adjusting the intensity of light emitted by the PTDL
(programmable tapped delay line) to Sim55-1 engine software switch
5.
(programmable tapped delay line) to Sim55-1 engine software switch
5.
Sim55-1 Engine Software Switch 5
Bits
Light intensity
5 6 7
0 * *
Current
control
control
(Factory default
setting)
setting)
1 0 0
Variable
control
control
High
1 0 1
Medium
(High)
1 1 0
Medium
(Low)
1 1 1
Low
