Read Sharp MX-M850 (serv.man28) Service Manual online
MX-M1100 FAN, FILTER SECTION R – 3
(2) Power cooling fan 3
1)
Remove the rear cabinet.
2)
Disconnect the connector (a). Remove the screw (b), and
remove the power cooling fan 3 (c).
* When installing, be careful to the direction of the fan label
remove the power cooling fan 3 (c).
* When installing, be careful to the direction of the fan label
(d).
* Check to confirm that the resin part is engaged with the
notch of the fan.
(3) Power cooling fan 1 / Power cooling fan 2
1)
Remove the rear cabinet and the right cabinet rear upper.
2)
Remove the screw (a), and open the control box (b).
3)
Disconnect the connector (a). Remove the screw (b), and
remove the AC-OP power unit (c).
remove the AC-OP power unit (c).
4)
Remove the screw (a), and remove the main power unit (b).
5)
Remove the screw (a), and remove the fan unit (b).
6)
Disconnect the connector (a). Remove the screw (b), and
remove the power cooling fan 1 (c), and the power cooling fan
2 (d).
* When installing, be careful to the direction of the fan label
remove the power cooling fan 1 (c), and the power cooling fan
2 (d).
* When installing, be careful to the direction of the fan label
(e).
* Check to confirm that the projection of the plate is engaged
with the notch of the fan.
* The connector (a) may be connected to either side.
b
b
a
c
d
a
a
b
a
b
b
a
c
b
a
a
a
a
a
a
b
b
c
e
b
e
d
a
a
Click on the first or last page to see other MX-M850 (serv.man28) service manuals if exist.