Read Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man46) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
[Description]
No.
Subject
Description
1
SharpOSA-related
A device with the SharpOSA function (optional) is now supported by the sheet
limiting function (ACL function).
limiting function (ACL function).
2
Copy-related
When using the massive manuscript function, if multiple trays were specified for
multiple copies, the second and later copies would not be output to their specified
trays. This fault has been corrected.
multiple copies, the second and later copies would not be output to their specified
trays. This fault has been corrected.
3
Network-related
A ‘CE-00’ error occurred on the device when it was not made public on the
network. This fault has been corrected.
network. This fault has been corrected.
4
Printer-related
Printing AR Minchotai U fort caused “square markings and thinner characters on
the whole.” This fault has been corrected.
the whole.” This fault has been corrected.
5
Printer-related
Printing failed on the left edge when setting “F15
A4 horizontal” in “scale down
printing” of the ESC/PS and moving an image from “left end” to “center” position
via “correct positioning.” This fault has been corrected.
via “correct positioning.” This fault has been corrected.
6
Printer-related
A jam would occur with the printing that has been output to a finisher because the
stapling and non-stapling jobs would become linked. This fault has been
corrected.
stapling and non-stapling jobs would become linked. This fault has been
corrected.
7
Printer-related
Certain types of documents could not be printed using the Mac PS driver. This fault
has been corrected.
has been corrected.
8
Printer-related
2-Up printing from the PS driver resulted in characters created using special fonts,
included in PDF data, being printed as if crushed. This fault has been corrected.
included in PDF data, being printed as if crushed. This fault has been corrected.
9
Printer-related
A printing error occurred when forms containing special data are downloaded and
printed from the PC. This fault has been corrected.
printed from the PC. This fault has been corrected.
10
Printer-related
The PCL macro could not be registered on the HDD. This fault has been corrected.
11
Printer-related
The PCL font registered on the HDD could not be printed properly. This fault has
been corrected.
been corrected.
12
Scanner-related
When scanning starts while FTP direct printing is being performed the main unit
would crash. This fault has been corrected.
would crash. This fault has been corrected.
