MX-M266N, MX-M316N, MX-M356N (serv.man3). NOTE Service Manual for models with the V suffix. - Sharp Copying Equipment Service Manual (repair manual). Page 108

MX-M356NV  SIMULATION  6 – 29

Contents of set items
A: Enable/Disable setting of the toner preparation message display.
B:  The  toner  remaining  quantity  at  which  the  toner  preparation
message is displayed.
C: Enable/Disable setting of the toner preparation message display
when the toner near end status is reached.
D: Machine operation at toner end
E:  Number  of  allowable  copy/print/FAX  when  the  toner  near  end
message is displayed. (Range: 0 - 160 sheets)
The  number  of  output  print  allowed  in  item  D  is  based  on  the
assumption  that  the  sheets  are  of  A4  size  with  print  ratio  of  6%.
(The  number  of  outputs  allowed  differs  depending  on  the  paper
size and the print ratio.)

CAUTION: When  item  A  is  set  to  "0"  and  item  E  is  properly  set,

printing  can  be  made  after  toner  near  end.  However,
improper  phenomena  such  as  insufficient  density,  thin
spots, or improper color balance may result depending
on the using conditions. When item E is set to "1" print-
ing is disabled after toner near end. In this case, toner
end  display  is  made  in  the  toner  near  end  status,  and
copy/print/FAX outputs are disabled.

 

26-73

Setting

Function (Purpose) Enlargement  continuous  shoot,  A3  wide

copy mode image loss (shade delete quan-
tity) adjustment

Operation/Procedure
1)

Select an item to be set with scroll keys.

2)

Enter the set value with 10-key.

3)

Press [OK] key.
When  the  adjustment  value  is  increased,  the  image  loss
(shade delete quantity) is increased.

 

26-74

Setting

Function (Purpose) Used to set the OSA trial mode.
Section

Operation/Procedure
1)

Enter the set value with 10-key.

2)

Press [OK] key.

 

26-78

Setting

Function (Purpose) Used  to  set  the  password  of  the  remote

operation panel.

Operation/Procedure
1)

Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW".
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.

2)

Press [SET] key.

E

TONER END 
COUNT

Setting of the 
number of copy/print/
FAX outputs Enable 
after TONER NEAR 
END.

1 - 5

4

F

TONER E-MAIL 
ALERT

0

Low status send 
of E-mail alert 
(When the toner 
preparation 
message is 
displayed) (in 
near near toner 
end)

0 - 1

1

1

Low status send 
of E-mail alert 
(near toner end)

1

0

2

20

3

40

4

80

5

160

A

DELETING 
SHADOW ADJ 
(M)

Rear frame side 
image loss quantity 
(shade delete 
quantity) adjustment

0 - 50

0 
(Adjustment 
amount: 
0.1mm/step)

B

DELETING 
SHADOW ADJ (S)

Lead edge image 
loss quantity (shade 
delete quantity) 
adjustment

0 - 50

0 
(Adjustment 
amount: 
0.1mm/step)

A

OSA TRIAL MODE 
(0: YES 1: NO)

0

Used to set the 
OSA trial mode.

0 - 1

1

1

OSA trial mode is 
canceled.