MX-M266N, MX-M316N, MX-M356N (serv.man3). NOTE Service Manual for models with the V suffix. - Sharp Copying Equipment Service Manual (repair manual). Page 109

MX-M356NV  SIMULATION  6 – 30

 

26-79

Setting

Function (Purpose) Used to set YES/NO of the pop-up display

of user data delete result.

Operation/Procedure
1) Enter the set value with 10-key.

The value for the display operation specification after comple-
tion of user data delete is set.

2) Press [OK] key.

 

 

27-1

Setting

Function (Purpose) Used  to  set  non-detection  of  communica-

tion error (U7-00) with RIC. (FSS function)

Operation/Procedure
1) Enter the set value with 10-key.

2) Press [OK] key.

The set value in step 1) is saved.

 

27-2

Setting

Function (Purpose) Used  to  set  the  sender's  registration  num-

ber  and  the  HOST  server  telephone  num-
ber. (FSS function)

Operation/Procedure
1) Select an item to be set with touch panel. 

[USER FAX NO] [SERVA TEL NO]

2) Enter the set value with 10-key.
3) Press [SET] key.

The set value in step 2) is saved.

A

DISP SET

User data delete result 
pop-up display ON

YES

1

0 (NO)

User data delete result 
pop-up display OFF

NO

0

0

Not detection

1

Detection

USER FAX_NO.

Sender registration number (Max. 16 digits)

SERVA TEL_NO.

Host server telephone number (Max. 16 digits)
* If the connection process is not completed 

normally when registering the FSS, calling to the 
HOST may be continuously made every time 
when the power is turned ON (from OFF) or 
rebooted.
In this case, enter "********" to inhibit calling to the 
HOST.