Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man3) Service Manual online
MX-M356NV SIMULATION 6 – 26
26-18
Purpose
Setting
Function (Purpose) Used to set Disable/Enable of the toner
save mode operation.
(For the Japan and the UK versions.)
(For the Japan and the UK versions.)
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
26-30
Purpose
Setting
Function (Purpose) Used to set the operation mode corre-
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
standards). (For slow start to drive the fus-
ing heater lamp)
Section
Operation/Procedure
1) Enter the set value with 10-key.
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
* Even in Enable state, the control may not be executed due
* Even in Enable state, the control may not be executed due
to the power frequency, etc.
26-32
Purpose
Setting
Function (Purpose) Used to set the special functions.
Section
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
26-35
Purpose
Setting
Function (Purpose) Used to set the display mode of SIM 22-4
trouble history when a same trouble
occurred repeatedly. There are two display
modes: display as one trouble and display
as several series of troubles.
occurred repeatedly. There are two display
modes: display as one trouble and display
as several series of troubles.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
26-38
Purpose
Setting
Function (Purpose) Used to set Continue/Stop of print when the
maintenance life is reached.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
26-49
Purpose
Setting
Function (Purpose) Used to set the print speed of postcards
mode.
Section
Operation/Procedure
Select the copy speed mode with the touch panel. (Default: LOW)
Select the copy speed mode with the touch panel. (Default: LOW)
Item
Display
Content
Default
value
A
COPY
0
Copy toner save mode is inhibited.
0
1
Copy toner save mode is allowed
B
PRINTER
0
Printer toner save mode is inhibited.
0
1
Printer toner save mode is allowed.
0
Control allowed
1
Control inhibited
U.S.A
1 (CE not supported)
EUROPE
0 (CE supported)
CANADA
1 (CE not supported)
U.K.
0 (CE supported)
INCH
1 (CE not supported)
AUS.
0 (CE supported)
JAPAN
1 (CE not supported)
AB_A
0 (CE supported)
AB_B
1 (CE not supported)
CHINA
0 (CE supported)
Item/Display
Content
Setting range
Default
value
A CLEANING
PRINT SET
The screen of the
cleaning mode self print
execution is displayed.
(ON)
cleaning mode self print
execution is displayed.
(ON)
0
YES
1(NO)
The screen of the
cleaning mode self print
execution is not
displayed. (OFF)
cleaning mode self print
execution is not
displayed. (OFF)
1
NO
0
Only once display.
1
Any time display.
Item/Display
Content
Default
value
A
MAINTENANCE
LIFE OVER
(0: CONTINUE
1: STOP)
LIFE OVER
(0: CONTINUE
1: STOP)
0
Setting of Print Continue/
Stop when the maintenance
life is over (Print Continue)
Stop when the maintenance
life is over (Print Continue)
0
1
Setting of Print Continue/
Stop when the maintenance
life is over (Print Stop)
Stop when the maintenance
life is over (Print Stop)
Item
Setting
value
Content
Default
value
POSTCARD
LOW
Postcard copy speed LOW
LOW
HIGH
Postcard copy speed HIGH
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man3) service manuals if exist.