Read Sharp MX-LC13 (serv.man15) Technical Bulletin online
MX-7040N MX-LC13 (LARGE CAPACITY TRAYS) 8 – 3
4) Insert the installation plate of the LCT to the mounting plate of
the paper pass unit.
5) Open the front door of LCT and remove the screw and remove
the lower cabinet.
6) Install the adjuster (Packed items No.3) and adjuste the height
of LC13 (4 places)
7) Adjust height in order to make the gap evenly of each cabinet
as the figure below.
8)
Adjust height in order to make the height and the gap evenly of
each cabinet as the figure below.
each cabinet as the figure below.
9)
Fix the positioning plate and with the screw (Packed items
No.4 S-tight, M4 x 8).
No.4 S-tight, M4 x 8).
10) Open the front cabinet and fix the lower cabinet with the screw.
NOTE: Note for separation
When separating, tighten the screw to release the lock.
When connecting again, loosen the screw after connection.
When connecting again, loosen the screw after connection.
[F side]
[R side]
Click on the first or last page to see other MX-LC13 (serv.man15) service manuals if exist.