Read Sharp MX-LC13 (serv.man15) Technical Bulletin online
MX-7040N MX-LC13 (LARGE CAPACITY TRAYS) 8 – 1
MX-7040N
Service Manual
[8] MX-LC13 (LARGE CAPACITY TRAYS)
1. Unpacking
NOTE: Before installing MX-LC13, the installation of MX-RB14 is
needed.
A. Remove the large capacity trays
1) Remove the machine from the palette with a forklift or a slope
(DKIT-0367FCZZ).
NOTE: When using a forklift, raise the casters to the top in
order not to break them.
B. Packed items check
*1: Not used for the after July / 2013 production.
*2: Not packed after July / 2013 production
*3: Only 4 pcs of screws are used for after July / 2013 production.
*4: Packed number was changed after July / 2013 production.
*2: Not packed after July / 2013 production
*3: Only 4 pcs of screws are used for after July / 2013 production.
*4: Packed number was changed after July / 2013 production.
2. Unit production month check
A. Unit production month check
Check the label on the carton box as the figure below.
Before June 2013 production:
120V series: Less than A35
200V series: Less than A25
After July 2013 production:
120V series: More than A46
200V series: More than A36
Before June 2013 production:
120V series: Less than A35
200V series: Less than A25
After July 2013 production:
120V series: More than A46
200V series: More than A36
B. Combination for Installation
The installation procedure is different by the combination of the
production month of MX-RB14 and MX-LC13.
production month of MX-RB14 and MX-LC13.
C. Differences list by combination
4
3
2
5
1
6
7
11
12
8
10
9
No.
Name
Quantity
1
LCT connecting plate F
1
2
LCT connecting plate R
1
3
Height adjustment plate
4
4
Screw (S-tight, M4 x 8)
*3
11 to 8 *4
5
Power cable
1
6
Connecting plate upper
2
7
Positioning plate F
*2
1
8
Positioning plate R
*2
1
9
Connecting plate lower F
*1
1
10
Connecting plate lower R
*1
1
11
Screw (Hex washer S-tight M4 x 18)
4
12
L-shape driver
1
Combination of RB14 / LC13
Instlattion method
Less than A10 / Less than A35 or A25
Go to [3. Installation 1]
Less tahn A10 / More than A46 or A36
Go to [4. Installation 2]
More than A20 / Less than A35 or A25
Go to [5. Installation 3]
More than A20 / Less thanA46 or A36
Go to [6. Installation 4]
Combination of RB14 / LC13
Positioning Pin
Connection plate
Off center adjustment
RB14 height adjustment
Less than A10 /
Less than A35 or A25
Less than A35 or A25
Use
Use
1. By height adjustment
2. By regulation plates adjustment
2. By regulation plates adjustment
Use the adjuster for height
adjustment.
adjustment.
Less tahn A10 /
More than A46 or A36
More than A46 or A36
Not use
Use
1. By connection plate adjustment
2. By regulation plates adjustment
2. By regulation plates adjustment
Use the adjuster for height
adjustment.
adjustment.
More than A20 /
Less than A35 or A25
Less than A35 or A25
Use
Not used (Already
attached on RB14)
attached on RB14)
1. By height adjustment
2. By regulation plates adjustment
2. By regulation plates adjustment
No need to adjust the height.
(lifted by LC13)
(lifted by LC13)
More than A20 /
Less thanA46 or A36
Less thanA46 or A36
Not use
Not used (Already
attached on RB14)
attached on RB14)
1. By connection plate adjustment
2. By regulation plates adjustment
2. By regulation plates adjustment
No need to adjust the height.
(lifted by LC13)
(lifted by LC13)
TopPage
5
: ‘14/Jan
5
Click on the first or last page to see other MX-LC13 (serv.man15) service manuals if exist.