MX-LC13 (serv.man15). IMPROVEMENTS FOR INSTALLING MX-LC13 N - Sharp Copying Equipment Technical Bulletin (repair manual). Page 21

MX-7040N  MX-LC13 (LARGE CAPACITY TRAYS)  8 – 2

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1) Draw out the second tray from the unit.

Push the button of the bottom side of the unit to unlock the
tray, and then slowly pull out the tray until it stops.

2) Remove 3 screws from the tray.

3) Slowly insert the tray to the original position.

1)

Attach the LCT connecting plate to the large capacity trays
with the screws (Packed items No.4 S-tight, M4 x 8).
MEMO: The reference label is attached to the plate. Attach it
so that the label can be seen from the outside.

2)

Attach the height adjustment mounting plates F/R and the con-
nection plates lower F/R to the relay unit.

3)

Fix the upper mounting plates to the machine with the screws
(Packed items No. 4 S-tight, M4 x 8).