MX-5500N, MX-6200N, MX-7000N (serv.man207). SCANNER DRYING HEATER AS SERVICE PART - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man207) Technical Bulletin online

5/5
9. Secure the heater wire with a snap band.
*Secure the heater wire with the snap band while pulling it in the arrow direction. (The lower part of the wire
must be free from loose.)
*Cut the snap band tip approx. 5 mm or less.
10. Move the lamp UN by hand and check that all the movable parts move smoothly.
*Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror UN.
*Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
Page of 5
Display

Download Sharp MX-5500N / MX-6200N / MX-7000N (serv.man207) Technical Bulletin