Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man207) Technical Bulletin online
4/5
6.Connect the connector of the heater fixing plate assy (explained on Page 1) to the heater (see the figure
below) and secure it with two M3x4 round-tipped screws.(Tight two screws)
*Screw tightening torque: 1.0 to 1.2 N m
*Secure the connector securely (see the figure below).
*Insert the positioning dowel into the hole.
*Secure the connector securely (see the figure below).
*Insert the positioning dowel into the hole.
7. Secure the heater with the M4x6 bind machine screw.
*Screw tightening torque: 1.6 to 1.8 N m
*The heater pawl must be inserted into the hole.
*Screw tightening torque: 1.6 to 1.8 N m
*The heater pawl must be inserted into the hole.
8. Pass the heater harness through the five clamps and perform wire processing.
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man207) service manuals if exist.