Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 43
(8) Inlet feed unit
a. Removal of front cover
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it.
* For MX-FNX3, refer to 1-A-(1)-a.
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it.
* For MX-FNX3, refer to 1-A-(1)-a.
b. Removal of rear cover
1) Slide the tray cable cover [1] to the tray side, and remove it.
2) Remove six screws [2], and lift and remove the rear cover [3].
* For MX-FNX3, refer to 1-A-(2)-a.
1) Slide the tray cable cover [1] to the tray side, and remove it.
2) Remove six screws [2], and lift and remove the rear cover [3].
* For MX-FNX3, refer to 1-A-(2)-a.
c. Removal of saddle inlet front inside cover
1) Remove the three screws [1], and remove the saddle inlet front
1) Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
d. Removal of front inside upper cover
1)
1)
Remove the four screws [1], and remove the front inside upper
cover [2].
cover [2].
* For MX-FNX3, refer to 1-A-(3)-d.
e. Removal of inlet feed unit
1)
1)
Disconnect the connectors [1] at four positions, and remove
the harness from the clamp [2].
the harness from the clamp [2].
2)
Remove the four screws [3].
3)
Open the upper cover [4], and remove the inlet port feed unit
[5].
[5].
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[1]
[2]
[3]
[3]
[5]
[4]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man19) service manuals if exist.