Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 57
(3) Upper guide flapper
1) Remove the paper pass unit.
2) Remove the rear cabinet.
3) Remove the stopper band A and bracket B, and remove the
2) Remove the rear cabinet.
3) Remove the stopper band A and bracket B, and remove the
upper guide unit.
* When installing the upper guide flapper, mount the bracket
so that it is aligned with the adjustment reference. If the
upper guide unit magnet is not fit snugly, adjust the bracket
until it is positioned properly.
upper guide unit magnet is not fit snugly, adjust the bracket
until it is positioned properly.
4) Remove the parts, and remove the upper guide flapper.
* When removing the resin lever, pay close attention not to
damage it.
(4) Paper pass fan
1)
Remove the paper pass unit.
2)
Remove the rear cabinet.
3)
Remove the bottom cover.
* When removing the bottom cover, pay attention for the
* When removing the bottom cover, pay attention for the
pawls located on the delivery side.
4)
Remove the clamp parts and the connector, and remove the
paper pass fan.
* When installing the paper pass fan, orient the label (A) to the
paper pass fan.
* When installing the paper pass fan, orient the label (A) to the
direction shown on the picture below.
(5) Paper pass motor
1)
Remove the paper pass unit.
2)
Remove the rear cabinet.
3)
Remove the bottom cover.
4)
Disconnect the connector, and remove the relay feed motor.
2
B
3
1
A
Adjustment reference
1
1
2
3
A
1
2
3
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man19) service manuals if exist.