Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 60
C. Left cabinet unit
(1) Paper pass unit cover sensor
1) Remove the paper pass unit.
2) Remove the reverse tray.
3) Release the lock, and separate the saddle stitch finisher from
2) Remove the reverse tray.
3) Release the lock, and separate the saddle stitch finisher from
the main unit.
4) Remove the left cover.
5) Disconnect the connector, and remove the sensor bracket A.
Then, remove the paper pass unit cover sensor.
(2) Paper pass PCB
1) Remove the paper pass unit.
2) Remove the reverse tray.
3) Separate the saddle stitch finisher from the main unit.
4) Remove the left cover.
5) Remove the sensor bracket.
6) Remove the metal plates A on the left cover.
2) Remove the reverse tray.
3) Separate the saddle stitch finisher from the main unit.
4) Remove the left cover.
5) Remove the sensor bracket.
6) Remove the metal plates A on the left cover.
7)
Remove the hexagon screws, and take out the paper pass
PCB. Then, disconnect the connector.
PCB. Then, disconnect the connector.
3. Punch module (MX-PNX2A/B/C/D)
A. Outer cover
(1) Rear cover
a. Removing the rear cover
1)
1)
Remove the three screws [1] to remove the rear cover [2].
(2) Upper cover
a. Removing the rear cover
1)
1)
Remove the three screws [1] to remove the rear cover [2].
1
2
3
A
A
2
1
3
4
[1]
[2]
[1]
[2]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man19) service manuals if exist.