Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 61
b. Removing the upper cover
1) Open the front door [1], and remove the three screws [2]. Pull
1) Open the front door [1], and remove the three screws [2]. Pull
out the dial [3], and remove the upper cover [4].
(3) Right guide
a. Removing the right guide
1) Remove the four screws [1] to remove the right guide [2].
1) Remove the four screws [1] to remove the right guide [2].
B. Drive system
(1) Punch motor
a. Removing rear cover
1) Remove the three screws [1] to remove the rear cover [2].
1) Remove the three screws [1] to remove the rear cover [2].
b. Removing the upper cover
1)
1)
Open the front door [1], and remove the three screws [2]. Pull
out the dial [3], and remove the upper cover [4].
out the dial [3], and remove the upper cover [4].
c. Removing punch motor
1)
1)
Disconnect the connector [1].
2)
Remove the two screws [2] to remove the punch motor [3].
(2) Horizontal registration motor
a. Removing rear cover
1)
1)
Remove the three screws [1] to remove the rear cover [2].
[2]
[1]
[4]
[3]
[4]
[2]
[1]
[2]
[1]
[2]
[2]
[1]
[4]
[3]
[4]
[2]
[2]
[3]
[1]
[1]
[2]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man19) service manuals if exist.