MX-2600N, MX-3100N, MX-2600G, MX-3100G (serv.man51). REVISED TRAY HEATER KIT PROCEDURES. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 22

Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man51) Technical Bulletin online

 
                                                                                                                                      
CCE 620R   
 
 
 
15. Insert the snap band of the LSU-WH harness (one place). 
 
16. Insert the three snap bands of the LSU heater harness. 
 
 
 
 
 
 
 
 
 
 
 
 
 
17. Connect the connector of the LSU-WH harness 
to the connector of the LSU heater harness. 
 
 
 
 
 
18. Turn on the heater switch, measure the resistance values between the L side and ground side and 
between the N side and ground side of the AC input plug, and check that the heater has not shorted. 
* Turn off the heater switch if it is not used after check. 
 
 
Page of 22
Display

Download Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man51) Technical Bulletin