Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man51) Technical Bulletin online
CCE 620R
9. Secure the heater wire with a snap band.
* Secure the heater wire with the snap band while pulling it in the arrow direction. (The lower part of the
wire must be free from loose.)
* Cut the snap band tip approx. 5 mm or less.
10. Move the lamp UN by hand and check that all the movable parts move smoothly.
* Check that there is no interference in the lower parts of the heater harness, wire, and 2/3 mirror UN.
* Check that each part is free from interference.
* Check that each part is free from interference.
11. Remount the removed parts by reversing the procedure.
- Page 10 -
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man51) service manuals if exist.