Read Sharp AR-PE2 (serv.man34) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin054
Page: 4 of 4
15. Wait for the following menu to appear:-
16. Type the following “Copy” command at the MS Dos prompt but DO NOT
press the enter key at this stage.
COPY/B PART2 LPT1:
17. Press the INSTALLATION button from the menu on the copier LCD screen-
the following message should be displayed:-
18. When the “Copy Installation Software to Parallel Port” message appears
(shown below), press the ENTER (return) key on the PC and also execute
the OK button on the copier LCD screen.
the OK button on the copier LCD screen.
19. A “Please Wait – Installation” message will appear during installation.
Installation can take between 15 – 45 minutes, depending on PC specification.
20. After a successful installation, press the OK button.
The Dos window on the PC will display a “One File Copied” message.
21. When the following message appears, select RESUME BOOT, then the ok
button and wait whilst the AR-PE2 boots.
22. At the language screen, select the name of the language you want to use by
using the scroll up and down arrows to cycle through available languages.
Once the correct language has been selected, the Fiery controller will
automatically boot into the RUN SETUP menu from where the controller can be
configured as normal.
Once the correct language has been selected, the Fiery controller will
automatically boot into the RUN SETUP menu from where the controller can be
configured as normal.
Diagnostic
>
Resume Boot
>
Installation
>
Clear Server
>
Flushing Parallel Port
Please Wait…
Please Wait…
Copy Installation
Software to
Parallel Port
Software to
Parallel Port
OK
Diagnostic
>
Resume Boot
>
Installation
>
Clear Server
>