Read Sharp AR-PE2 (serv.man15) FAQ online
FIERY
Last Update
07-May
ARPE1 FIERY
ARC150
ARC250
Revision/Correction Made
Web Site
1.00
Start of production.
1.01
To correct the following symptom :- If a multiple set print job is sent to the sorter and the copier
runs out of paper, the copier will display an “out of paper” condition. However, the ARPE1 will
not highlight this condition and even if paper is placed into the copier, printing will not resume.
1.02
To correct noise lines appearing during a print job.
Note: Auto-Cal Disabled
1.03
As v1.02 except Auto-Cal function enabled.
1.10
To resume printing after a “Paper Out” condition when printing multiple sets to the sorter (as v1.01 patch).
To correct noise lines appearing (as v1.03 patch)
Available
To correct large print jobs failing to cancel.
from parts
To correct the number of requested sets being incorrectly displayed on the Command Workstation & AR-PE1.
centre.
LCD display.
“Cancel Rip Jobs” could fail to clear on the PE1 LCD after cancelling a print job.
ARPE1CDROM110
To correct “F9-00” appearing when opening a paper tray whilst running “Run Setup” of the AR-PE1 menu.
The sorter could fail to work correctly when printing 21 sets of 5 or more pages in simplex mode.
The “Loadxxx paper size” message fails to appear when the required paper size is not available.
The default “Page Order” has been changed to Reverse.
1.00
To support AR-C250 only
1.1 SAFH
1.1 SAFH
An "Option not Available" message could appear on the copier LCD when a print job is sent to the specifically
Yes
selected LCC input tray using the print driver.
4 colour black instead of single colour black.
1.1 MP74
1.1 MP71
To correct the original job log display error (incorrect total)
Yes
1.1LJG9
1.1LJG9
To correct the screen resolution limitation (unable to select higher than Standard VGA) when the FACI kit is installed.
Yes
ARPE2 FIERY
ARC160
Revision/Correction Made
Web Site
1.01
Start of AB production
1-3H13X
Colour profile modification.
Yes
Corrects the moire filter not working when scanning in offset mode using Fiery scan.
1-50LVP
Improved security (Prevents FTP access to the controller)
Yes
1.1
Supports "Custom Page Size" printing.
N/A
Universal system software to support both AR-C160 & the forthcoming AR-C270.
1-677LO
Yes
Enables Manual NDS Configuration.
Yes
1-4MZZL
Display
