AR-PB9 (serv.man2). ARPB9-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 8

7) Windows driver file search will find the device “SHARP AR-150

Series PCL”. Click the Next button and follow the on-screen in-
structions.

8) Insert the installation CD-ROM into the CD-ROM drive. (If you

are using the USB interface, confirm that the installation CD-
ROM is in the CD-ROM drive.) Click the Start button and select
Run. When the window shown below appears, type R:\SETUP
(if the CD-ROM is designated as drive R) and click the OK but-
ton. Follow the on-screen instructions.

With both the computer and the printer turned off, connect the printer
to the computer with a parallel interface cable.
1) Load paper into the paper tray of the printer. For instructions

on loading paper, see the section LOADING COPY PAPER in
the copier operation manual.

2) Turn on the printer and then start Windows on your computer.

Note: Before installing the printer driver, be sure to close all

other applications which may be open.

3) Insert the installation CD-ROM into the CD-ROM drive.
4) Choose File from the Menu bar in Program Manager, and then

choose the Run... command.

5) Type R:\SETUP (if the CD-ROM is designated as drive R) in

the command line box and then click the OK button.

6) Follow the on-screen instructions.

When you install the printer driver, the SHARP AR-150 Series PCL
printer driver group is automatically created. The printer driver group in-
cludes the following items:
Uninstall AR-150 Series PCL
The printer driver can be uninstalled. If the driver is uninstalled, printing
can no longer be performed on the printer.

For proper uninstallation, be sure to use the SHARP uninstall program
of the printer driver group.
Readme
The latest information on the printer driver is included in this document.
Read the Readme first.
Status Monitor
The Status Monitor window provides visual information about the
printer state and current job.
Status Monitor HELP
Assistance and information for Status Monitor.
● Be sure to read the “Readme” document found in the printer driver

group before using your SHARP AR-150 Series PCL printer.

● You cannot use both the status monitor and the Print Manager at the

same time in Windows 3.1 environment.

To test print the configuration page and font list, use the following pro-
cedure:
1) Press and hold down the light and dark keys simultaneously for

more than 5 seconds until all the alarm indicators blink and “--”
appears in the display.

2) Set  “6” (configuration page) or “7” (font list) using the left copy

quantity key. The selected number will blink in the left side of
the display.

3) Press the print key. The entered program number will be steadi-

ly lit and the currently selected parameter number for the pro-
gram will blink on the right side of the display.

4) Select the desired parameter using the right copy quantity key.

The entered parameter number will blink on the right of the dis-
play.

Program 

No.

Mode

Parameters

6

Configu-

ration

page

0 

→ English

1 

→ French

2 

→ Spanish

3 

→ Italian

4 

→ German

7

Font list

0 

→ English

1 

→ French

2 

→ Spanish

3 

→ Italian

4 

→ German

5) Press the print key. The test page prints.

Note: To change the setting or to set another mode, press the

clear key. The printer will return to step 2.

Configuration Page items

1st level item

2nd level item

3rd level item

Hardware Status

Machine Information

Language

Hardware Specs

Basic Memory

Total Memory

Processor

64 bit RISC

Interface Menu

I/O Timeout

ROM Version

Total Page Count

Version Information

PCL6

Input Paper Tray

Bypass Tray

Tray 1

Tray 2

AR-PB9

3  –  5