AR-PB9 (serv.man2). ARPB9-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 4

Turn the main switch to the “OFF” position and remove the power plug
from the outlet.
1) Remove the document cover.
● Remove the document cover from the copier.

2) Remove the rear cabinet.
● Remove the four screws and then remove the rear cabinet.

3) Remove the PWB cover.

(1) Loosen the screw that secures the PWB cover lid.
(2) Push up the PWB cover lid and
(3) Rotate it counterclockwise to remove it.

4) Attach the PCL interface PWB.
● Fit the connector of the PCL interface PWB into the mounting posi-

tion of the copier, secure the side A with three screws, and then
secure the front B with two screws.

Installation manual, 1 sheet

PCL PWB, 1 pc.

PWB cover lid 2, 1 pc.

 Screws (M3 x 8), 5 pcs.

 Screws (M3 x 6), 14 pcs.

 PWB cover, 1 pc.

PCL interface PWB, 1 pc.

PCL harness, 1 pc.

Parts included

CD ROM

Operation Manual

1

1

3

2

M3X8

M3X8

A

B

AR-PB9

3  –  1