Read Sharp AR-PB9 (serv.man2) Service Manual online
10) Attach the rear cabinet.
(1) Hang the four pawls shown in the illustration below on the
plate.
(2) Position the cabinet to the upper screw positions.
11) Attach the cover to the rear cabinet.
(1) Align the arrow marks as shown in the illustration.
(2) Then slide the cover to the left.
(3) Secure the cover with a screw.
(2) Then slide the cover to the left.
(3) Secure the cover with a screw.
12) Attach the document cover.
● Remove the document cover from the copier.
● Remove the document cover from the copier.
● Insert the power plug into the outlet and turn the main switch of the
copier to the “ON” position.
● Installation of the AR-PB9 is now complete.
2. INSTALLING THE PRINTER DRIVER
(Description of the printer driver)
The printer driver is the software program which runs the printer. It con-
verts the data in your file into information that the printer can under-
stand. It also controls communication between the printer and
computer as the data is printed.
verts the data in your file into information that the printer can under-
stand. It also controls communication between the printer and
computer as the data is printed.
(Checking the hardware and software
requirements)
requirements)
You will need the following hardware and software in order to install the
printer driver.
Computer type
printer driver.
Computer type
IBM PC/AT or compatible computer equipped
with a bi-directional parallel or USB interface,
and CD-ROM drive
with a bi-directional parallel or USB interface,
and CD-ROM drive
Windows type
Windows 3.1x, Windows 95, Windows 98*,
Windows NT 4.0 * USB is supported on Win-
dows 98 preinstalled only.
Windows NT 4.0 * USB is supported on Win-
dows 98 preinstalled only.
CPU
486DX 66MHz or better
Physical RAM
Windows 95, Windows 3.1x: 8MB (16MB or
more is recommended.)
Windows NT 4.0: 12MB (16MB or more is
recommended.)
Windows 98: 16MB (32MB or more is recom-
mended.)
more is recommended.)
Windows NT 4.0: 12MB (16MB or more is
recommended.)
Windows 98: 16MB (32MB or more is recom-
mended.)
Display
640
× 480 dots (VGA) or better
Hard disk free space
10MB or more
Caution: The printer driver included in this product cannot be
used under Windows NT 3.5x, OS/2, pure MS-DOS
and other operating systems which are not described
above.
and other operating systems which are not described
above.
Note: The PCL6 printer driver is not available in Windows 3.1
environment.
(Installing the printer driver)
The software for your printer is provided on CD-ROM.
Before installing the printer driver, be sure to check the following items.
● Is the printer connected properly to the computer?
Before installing the printer driver, be sure to check the following items.
● Is the printer connected properly to the computer?
● Does the printer have paper?
A. Windows 95/Windows NT 4.0 Installation
Instructions:
With both the computer and the printer turned off, connect the printer
to the computer with a parallel interface cable.
1) Load paper into the paper tray of the printer. For instructions
to the computer with a parallel interface cable.
1) Load paper into the paper tray of the printer. For instructions
on loading paper, see the section LOADING COPY PAPER in
the copier operation manual.
the copier operation manual.
2) Turn on the printer.
M3X8
M3X8
M4X12
Side view
Pawl
Pawl
Arrow marks
After sliding
AR-PB9
3 – 3
Click on the first or last page to see other AR-PB9 (serv.man2) service manuals if exist.