AR-P350, AR-P450 (serv.man27). Commands for selection of paper input and output trays. Including Escape codes, PJL commands and Postscript commands. - Sharp Copying Equipment FAQ (repair manual). Page 2

Read Sharp AR-P350 / AR-P450 (serv.man27) FAQ online

PJL Paper Output Selection Commands
@PJL SET OUTTRAY=TRAY1
Top Tray
@PJL SET OUTTRAY=TRAY2
Job Separator tray, or Saddle Stitch Offset
@PJL SET OUTTRAY=TRAY3
Saddle Stitch Tray
@PJL SET OUTTRAY=TRAY4
Finisher Top Bin, or Mail box Top Bin
@PJL SET OUTTRAY=TRAY5
Finisher Offset, or Mail box Bin 1
@PJL SET OUTTRAY=TRAY6
Mail box Bin 2
@PJL SET OUTTRAY=TRAY7
Mail box Bin 3
@PJL SET OUTTRAY=TRAY8
Mail box Bin 4
@PJL SET OUTTRAY=TRAY9
Mail box Bin 5
@PJL SET OUTTRAY=TRAY10
Mail box Bin 6
@PJL SET OUTTRAY=TRAY11
Mail box Bin 7
Other PJL Commands
@PJL SET RET=ON
select edge enhancement ON/OFF.
Default ON
@PJL SET JOBSTAPLE=STAPLENON
select stapling, only available with
finisher option fitted.
STAPLENON/STAPLELEFT/
STAPLEBOTH/SADDLE
@PJL SET JOBBOOKLET=OFF
select pamphlet mode, ON/OFF.
@PJL SET ORIENTATION=PORTRAIT PORTRAIT/LANDSCAPE
@PJL SET DUPLEX=OFF
select duplex ON/OFF.  Default OFF
@PJL ENTER LANGUAGE=PCL
set language, forces interpreter into one
mode.  Stops problems of non
recognition of job language type.
PCL/PCLXL/POSTSCRIPT
Standard PCL Commands
Esc&l0S
Simplex
Esc&l1S
Duplex, long edge binding
Esc&l2S
Duplex, short edge binding
Page of 2
Display

Download Sharp AR-P350 / AR-P450 (serv.man27) FAQ