Read Sharp AR-NS2 (serv.man4) User Guide / Operation Manual online
Key Operator Program
19
3
Select the setting for which you wish to change the default setting
and then press the OK key.
and then press the OK key.
●
The setting screen for the selected setting appears. The procedure for changing the
default setting is the same as for changing the normal setting (page 13).
default setting is the same as for changing the normal setting (page 13).
●
When you press the OK key after changing the setting, you will return to the setting
selection screen. You can continue changing other settings.
selection screen. You can continue changing other settings.
4
Press the BACK key.
●
The value set in step 3 will be the new default setting.
NOTE
●
To return to the factory default settings, select "FACTORY DEFAULT" in the screen in
step 2 and then press the OK key. Select "YES" in the next message screen that appears
and then press the "OK" key.
step 2 and then press the OK key. Select "YES" in the next message screen that appears
and then press the "OK" key.
Establishing Account Control settings
In Step 1 of "Changing default scan settings", select "ACCOUNT CONTROL".
Network Scanner Account Control is similar to Copy Account Control. For detailed information,
refer to the Key Operator Program section* of your copier manual.
* In some regions, this information is provided as a separate booklet, the "Key Operator's Guide".
Network Scanner Account Control is similar to Copy Account Control. For detailed information,
refer to the Key Operator Program section* of your copier manual.
* In some regions, this information is provided as a separate booklet, the "Key Operator's Guide".
hyo2-arns2-e.book 19 ページ ２００１年５月１８日 金曜日 午前１２時２１分
Click on the first or last page to see other AR-NS2 (serv.man4) service manuals if exist.