Read Sharp AR-M351U / AR-M451U (serv.man17) Service Manual online
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 87
3. Other related items
(1) Simulation adjustment value/ Set value data
Each controller is provided with an EEPROM. The adjustment/set
values are collected to the MFP controller. If they are changed,
they are sent back and saved.
values are collected to the MFP controller. If they are changed,
they are sent back and saved.
●
Data saved by the PCU PWB
MFP
CONTROLLER
CONTROLLER
ENGINE
CONTROLLER
CONTROLLER
SCANNER
CONTROLLER
CONTROLLER
LCD
Saved adjustment value send
(When the power is turned on, etc.)
(When the power is turned on, etc.)
When the value is changed,
it is sent and saved.
it is sent and saved.
Counters
Adjustment value
Other
Drum rotation time counter
(Accumulated time)
(Accumulated time)
Developing bias voltage value
Serial number
Developer unit rotation time
counter
counter
Cleaning mode developing bias voltage value
Trouble history
Toner supply time (Block IC CHIP)
Main high voltage adjustment
Tray 1 size
Drum rotating time (Block IC
CHIP)
CHIP)
Transfer charger voltage value
LCC size
Total counter
Transfer belt cleaning voltage value
Manual destination information
Maintenance counter
Toner concentration reference value
Developing counter
Density correction start set time (Developer unit)
Tray 2 destination information
Drum counter
Density correction rotation time (Developer tank)
Toner cartridge counter
Density correction amount (Developer tank)
Tray 1 paper remaining quantity data
Valid paper counter
Correction execution direction, upper/lower limit
(Developer tank)
(Developer tank)
Tray 2 paper remaining quantity data
Tray 1 paper feed counter
Toner concentration temperature correction (low
temperature side) correction amount
temperature side) correction amount
Tray 3 paper remaining quantity data
Tray 2 paper feed counter
Toner concentration temperature correction (low
temperature side) set temperature
temperature side) set temperature
Tray 4 paper remaining quantity data
Tray 3 paper feed counter
Toner concentration temperature correction (low
temperature side) release temperature
temperature side) release temperature
Final toner concentration sensor output value
Tray 4 paper feed counter
Toner concentration temperature correction (high
temperature) correction amount
temperature) correction amount
Toner cartridge IC CHIP destination
Manual paper feed counter
Toner concentration temperature correction (high
temperature side) judgment temperature
temperature side) judgment temperature
Counter mode setting
ADU paper feed counter
Toner concentration temperature correction (high
temperature side) judgment voltage
temperature side) judgment voltage
White paper exit count setting
Staple counter
Toner concentration temperature correction (high
temperature side) correction value
temperature side) correction value
Trouble memory mode setting
Punch counter
Toner concentration temperature correction (low
temperature side) release time
temperature side) release time
Fusing operation mode (Prevention against
curl)
curl)
Main unit right-side paper exit
counter
counter
Toner concentration temperature correction (high
temperature side) toner concentration delay time
temperature side) toner concentration delay time
CE mark conforming operation mode
Multi-purpose width adjustment value
Maintenance cycle
Manual width adjustment value
Print stop setting when developer life over
Saddle staple counter
Heater lamp temperature (Center, normal control)
Saddle alignment operation priority mode
Lead edge adjustment
PCU SOFT SW
Led edge void set value
Rear edge void set value
Rear edge void set value
Side edge setting
Print off-center adjustment value
Resist amount adjustment value
Resist amount adjustment value
Laser power adjustment value
PPD1 sensor adjustment
Process correction inhibit allow set value
Process correction inhibit allow set value
Developing bias rising correction wait time
Developing bias rising correction adjustment value
Built-in finisher jogger position adjustment
Built-in finisher jogger position adjustment
Saddle adjustment value
Click on the first or last page to see other AR-M351U / AR-M451U (serv.man17) service manuals if exist.