Read Sharp AR-M351U / AR-M451U (serv.man17) Service Manual online
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 81
Operation/Procedure
1) Select YES/NO of data transfer.
2) Press [START] key.
Operation/Procedure
1) Enter the number corresponding to the information (item) to be
printed with 10-key.
2) Press [START] key.
Operation/Procedure
1) Enter the number corresponding to the volume with 10-key.
2) Press [START] key.
Selection of 1, 2, and 3 can be made during execution.
Operation/Procedure
1) Turn OFF the power.
2) Remove the protect pin.
3) Turn ON the power.
4) Enter the SIM 66-23 mode.
5) Press [START] key.
During operation, "EXECUTING" is displayed. When the operation
is completed normally, "COMPLETE" is displayed.
is completed normally, "COMPLETE" is displayed.
If an error occurs, "FAIL" is displayed.
6) Turn OFF the power, and attach the protect pin.
66-20
Purpose
Data transfer
Function
(Purpose)
(Purpose)
Used to read the back-up data by SIM 66-19 to the
SRAM/HDD. (Only when FAX is installed)
SRAM/HDD. (Only when FAX is installed)
Section
FAX
Item
Data
1
YES
Backup is executed.
2
NO
Backup is not executed.
66-21
Purpose
Adjustment/Setup/Operation data output/Check
(Display/Print)
(Display/Print)
Function
(Purpose)
(Purpose)
Used to print information related to FAX (various
registrations, communication management, file
management, system error protocol). (Only when
FAX is installed)
registrations, communication management, file
management, system error protocol). (Only when
FAX is installed)
Section
FAX
Item
Data
1
REGISTERED
Various registration information
2
MANAGEMENT
Communication management
information
information
3
FILE MANAGEMENT
File management information
4
SYSTEM ERROR
System error information
5
PROTOCOL
Protocol information
SIMULATION 66-20
ADDRESS DATA BACK UP. (READ FROM FLASH ROM)
ARE YOU SURE?
1. YES
2. NO
SIMULATION 66-20
ADDRESS DATA BACK UP. (READ FROM FLASH ROM) EXECUTING...
1
1
Press [START] key.
After completion of read
SIMULATION 66-21
FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START.
1. REGISTERED 2. MANAGEMENT
3. FILE MANAGEMENT 4. SYSTEM ERROR
5. PROTOCOL
(When 1)
SIMULATION 66-21
FAX INFORMATION PRINT OUT. EXECUTING···
1. REGISTERED
If there is no print data,
the display returns to the
original state without printing.
the display returns to the
original state without printing.
Select other than 0 and
press [START] key.
press [START] key.
After completion of backup
66-22
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to adjust the handset volume. (Only when
the FAX is installed.)
the FAX is installed.)
Section
FAX
Item
Operation
1
MIN
Small
2
MIDDLE
Medium
3
MAX
Large
Same display
Select 3 and press [START] key.
66-23
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to download the FAX program. (Only when
FAX is installed)
Not used in the market. (For development)
FAX is installed)
Not used in the market. (For development)
Section
FAX
Item
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
1. MIN
2. MIDDLE
3. MAX
2
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
EXECUTING···.
1. MIN
2. MIDDLE
3. MAX
2
Press [CUSTOM SETTINGS] key.
Press [START] key.
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
EXECUTING···.
1. MIN
2. MIDDLE
3. MAX
3
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
1. MIN
2. MIDDLE
3. MAX
3
Press [CUSTOM SETTINGS] key.
Click on the first or last page to see other AR-M351U / AR-M451U (serv.man17) service manuals if exist.