Read Sharp AR-M351U / AR-M451U (serv.man17) Service Manual online
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 86
Operation/Procedure
(Display message)
Operation/Procedure
1) Enter the number corresponding to the select IN signal YES/
NO setting with 10-key.
2) Press [START] key.
When the printer parallel I/F is used and a trouble is generated in
the communication between the PC and the printer, change the
setting of this simulation.
the communication between the PC and the printer, change the
setting of this simulation.
Operation/Procedure
During check, "CHECKING" is displayed. When check is com-
pleted normally, "OK" is displayed. In case of an error, "NG" is dis-
played.
pleted normally, "OK" is displayed. In case of an error, "NG" is dis-
played.
(Display message)
67
67-2
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of the parallel I/F of
the printer. (This simulation is for production only,
and requires a special tool for execution. Not used
in the market.)
the printer. (This simulation is for production only,
and requires a special tool for execution. Not used
in the market.)
Section
MFP controller
Item
Operation
Interface/Communication
WAITING
Waiting
READY
Check start OK
OK
Check end (Normal)
STAGE*NG
Check end (Error in stage *. *: 1 - 11)
lWith READY displayed,
press [START] key.
press [START] key.
Press [CUSTOM SETTINGS] key.
67-11
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set YES/NO of the parallel I/F select
signal of the printer.
signal of the printer.
Section
MFP controller
Item
Operation
Interface/Communication
Item
Default
0
OFF
1
1
ON
SIMULATION 67-2
CENTRO PORT CHECK.
CENTRO PORT:
READY
SIMULATION 67-2
CENTRO PORT CHECK.
CENTRO PORT:
OK
(or
STAGE7 NG
)
SIMULATION 67-11
CENTRO SELECT IN SIGNAL SETTING. SELECT 0-1, AND PRESS
START.
0. OFF
1. ON
67-16
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of the network card.
Section
MFP controller
Item
Operation
Interface/Communication
CHECKING
Checking
OK
Check end (Normal)
NG
Check end (Error)
Check end
Press [CUSTOM SETTINGS] key.
SIMULATION 67-16
NETWORK INTERFACE CARD CHECK.
NIC: CHECKING
SIMULATION 67-16
NETWORK INTERFACE CARD CHECK.
NIC: OK (or NG)
Click on the first or last page to see other AR-M351U / AR-M451U (serv.man17) service manuals if exist.