Read Sharp AR-FN2 (serv.man5) Service Manual online
1 2 3 4
Description
7
Reversion offset discharge mode
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size, the
number of sheets to be processed
and performs initial operation.
After the completion of the initial
operation, it becomes possible to
pass paper. The settings of the
dip switches are as follows:
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size, the
number of sheets to be processed
and performs initial operation.
After the completion of the initial
operation, it becomes possible to
pass paper. The settings of the
dip switches are as follows:
8
Staple discharge mode
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size, the
number of sheets to be processed
and performs initial operation.
After the completion of the initial
operation, it becomes possible to
pass paper. The settings of the
dip switches are as follows:
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size, the
number of sheets to be processed
and performs initial operation.
After the completion of the initial
operation, it becomes possible to
pass paper. The settings of the
dip switches are as follows:
9
Reversion offset aging mode
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size to
Letter and the number of sheets
to be pressed to 2, and performs
initial operation. After the
completion of the initial operation,
aging operation starts. The
settings of the dip switches are as
follows:
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size to
Letter and the number of sheets
to be pressed to 2, and performs
initial operation. After the
completion of the initial operation,
aging operation starts. The
settings of the dip switches are as
follows:
1 2 3 4
Description
10
Staple aging mode
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size to
Letter and the number of sheets
to be processed to 2, and
performs initial operation. After
the completion of the initial
operation, aging operation starts.
The settings of the dip switches
are as follows:
After turning on the machine in a
test mode, set to this mode with
the dip switches. Pressing the
push switch sets paper size to
Letter and the number of sheets
to be processed to 2, and
performs initial operation. After
the completion of the initial
operation, aging operation starts.
The settings of the dip switches
are as follows:
(3) When DIP SW4 is turned on, offset exit paper is
reversely discharged. (Used to check the
reversing operation in the printer mode.)
reversing operation in the printer mode.)
(4) All the dip switches are factory set to OFF.
ON
OFF
OFF
1 2
ON
OFF
OFF
A4
LETTER
B4
EXE
3 4
ON
OFF
OFF
2pls
5pls
10pls
30pls
ON
OFF
1 2
ON
OFF
OFF
A4
LETTER
B4
EXE
3 4
ON
OFF
OFF
2pls
5pls
10pls
30pls
ON
OFF
1 2
LETTER_Y
3 4
ON
OFF
OFF
2pls
ON
OFF
1 2
LETTER_Y
3 4
ON
OFF
OFF
2pls
1
ON
OFF
OFF
2pls
2 3
4pls
6pls
8pls
1
ON
OFF
OFF
10pls
2 3
12pls
14pls
16pls
6 – 2
