Read Sharp AR-FN2 (serv.man19) Technical Bulletin online
ARE217
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
07 March 2000
Model: ARFN2
Ref.:
Ref.:
007
Colour: White
Page:
Page:
1 of 4
1.
CHANGE OF THE CO-PACKING FORM OF THE SCREWS
2.
CHANGE OF THE REAR SHAFT SUPPORT PLATE, BEARING, ETC.
3.
ADDITION OF STAPLER LIGHT SHIELDING SHEET
4.
CHANGE OF THE FEEDING PAPER GUIDE UPPER
5.
CHANGE OF THE PHOTOINTERRUPTER
1.Change of the co-packing form of the screws
1. Model Name:
ARFN2
2. General:
To improve the workability, the co-packing form of the screws is changed from two bags
to one bag.
3. Action:
From production in December 1999.
2.Change of the rear shaft support plate, bearing, etc.
1. Model Name:
ARFN3
2. General:
Each part to which a temporary measure has been applied from the beginning is change
to molded part.
TECHNICAL BULLETIN
ARE217
Sharp Electronics (UK) Ltd., Technical Services Group
Moreover, the bearing is also changed since the distance between the rear shaft support
plate and rear reinforce plate is changed due to change of the round hole position.
3. Action:
From production in October 1999.
ARE217
Sharp Electronics (UK) Ltd., Technical Services Group
3.Addition of stapler light shielding sheet
1. Model Name:
ARFN3
2. General:
When setting the stapler unit on the main body, the sensor detects the stapler position.
Since detection error may occur due to stray light of the light shielding section, a stapler
light shielding sheet is added.
3. Action:
From production in December 1999.
4.Change of the feeding paper guide upper
1. Model Name:
ARFN3
2. General:
If black solid copy is performed with the face of A3 or double letter paper up, the copy
face of the paper comes into contact with the rib on the transport face of the feeding
paper guide upper; this may cause thin stripes. Therefore, the rib on the transport face is
no longer used.
3. Action:
From production in December 1999.
5.Change of the photointerrupter
1. Model Name:
ARSS2
2. General:
For common use with other models, the photointerrupter is changed to a compatible part.
ARE217
Sharp Electronics (UK) Ltd., Technical Services Group
3. Action:
From the middle of production in January 2000.
Current parts
New parts
No
Model
name
Version
P/G
No.
Parts code
Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
10 -63
OEUARM0608L//
OEUARM0608LZ1
AF
S paddler arm B
3
2 -25
OEUHLD0429L//
OEUHLD0429LZ1
AL
Rear turn shaft holding plate
2
2
NBRGY7012SCZZ
NBRGM5006BCZZ
AB
Bearing
'99/10
5
3
15
-
OEUSHE0556L//
AD
Stapler light shielding sheet
6
4
ARFN3
5 -4
OEUGID0427L//
OEUGID0427LZ1
AV
Paper guide upper
'99/12
3
5
ARSS2
All
2 -3
3 -12
OGZWG85382000
OGZWG85362000
AK
Photo interrupter
Mid-
'00/1
1
<Interchange>
1. Interchangeable.
4. Not Interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of related
parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
