AR-C170 (serv.man31). Printer controller section - Sharp Copying Equipment Service Manual (repair manual). Page 26

AR-C170M  PRINTER CONTROLLER SECTION  14 - 26

The PS font installing and uninstalling procedures for the AR-C260
series model with PS option are described below.

(Note) The PS fonts are licensed by Afga Monotype Corporation.

The PS fonts in the CD-ROM of the AR-PK4 may be
installed only to one machine according to the license con-
tract. When, therefore, HDD is replaced for repair, etc.,
uninstall the font data from the HDD.

1) PC (with a CD-ROM drive and a LAN port or a parallel port)

2) LAN cable or parallel cable

3) PS driver CD-ROM

1) Preparation and check

• Connect the printer and the PC with a LAN or a parallel

cable.

• Check to insure that the printer ready LED is lighted.

• In the case of LAN connection, print the printer setting list

and check the printer IP address.

• In the case of LAN connection, check to insure that the net-

work is properly set and the printer can be accessed.

• Set the PS driver CD-ROM. (Suppose that the CD-ROM

drive is "D:" drive.)

2) Open the OS prompt.

3) Shift to the PS font directory in the CD-ROM.

> d:

> cd cidfont

(Note) The PS font data are stored in a hidden folder on the root

directory of the PS driver CD-ROM. If the hidden folder set-
ting is valid, the hidden folder is not displayed on the DOS
prompt. To display it, disable the hidden folder setting.

Installation can be executed regardless of the above folder
display. To disable the hidden folder setting, however, per-
form the following procedures.
(Right-click the "cidfont" folder in the CD-ROM to open the
property. Click the general menu tab, and uncheck the hid-
den file check box.)

4) Execute the PS font install command.

a) In the case of LAN connection (When the printer IP

address is 10.36.14.191.)

> install 1 10.36.14.191 ENTER KEY

b) In the case of parallel connection

> install 2 ENTER KEY

5) Execute the procedures according to the display.

(Execute the underlined procedures.)

(Example)

D:\cidfont>install 1 10.36.14.191

Font data are installed via the network.

To continue, press any key . . .

Step 1: Create a directory for the PS fonts in the hard disk.

Connected to 10.36.14.191.

220 Sharp AR-NC5J Ver 01.01.01 FTP server.

331 Password required.

230 User Logged in.

Anonymous login succeeded for [email protected].
sharp.co.jp

ftp> bin

200 Type set to I.

ftp> put resource.ps

200 PORT command Ok.

150 Open data connection.

226 Data connection closed.

ftp: 2335694 bytes sent in 8.08Seconds 289.14Kbytes/sec.

ftp> bye

221 Quit.

Creating . . .

Check to insure that the printer data LED flashing is terminated,
and reboot the main unit.

To continue, press any key . . .

After checking the printer ready LED, press any key.

(Since the network initialization may not have been completed
immediately after lighting the LED, FTP connection may be failed.
In such a case, wait for 10sec after lighting the LED and continue
the process.)

To continue, press any key . . .

Step 2: Install the font data.

Connected to 10.36.14.191.

220 Sharp AR-NC5J Ver 01.01.01 FTP server.

331 Password required.

230 User Logged in.

Anonymous login succeeded for [email protected].
sharp.co.jp

ftp> bin

200 Type set to I.

ftp> put data\MoGothW3.CID

200 PORT command Ok.

150 Open data connection.

226 Data connection closed.

ftp: 2849552 bytes sent in 9.02Seconds 316.06Kbytes/sec.

ftp> put data\MoGothW4.CID

200 PORT command Ok.

150 Open data connection.

226 Data connection closed.

ftp: 2797264 bytes sent in 16.84Seconds 166.07Kbytes/sec.

ftp> put data\MoMaruW2.CID

200 PORT command Ok.

150 Open data connection.

226 Data connection closed.

ftp: 3524325 bytes sent in 18.14Seconds 194.27Kbytes/sec.

ftp> put data\MoMincW2.CID

200 PORT command Ok.

150 Open data connection.

226 Data connection closed.

ftp: 3581348 bytes sent in 18.73Seconds 191.16Kbytes/sec.

ftp> put data\MoMincW3.CID

200 PORT command Ok.

150 Open data connection.

226 Data connection closed.

ftp: 3225832 bytes sent in 17.67Seconds 182.55Kbytes/sec.

ftp> bye

221 Quit.

Check to insure that the printer data LED flashing is terminated,
and reboot the main unit.

When the machine is rebooted, installation of the font data is com-
pleted.

Print the PS fonts list to check to insure that installation is com-
pleted properly.

D:\cidfont>

6) Reboot the main unit and print the PS fonts list to check to

insure that the added fonts are registered.