Read Sharp AR-C170 (serv.man31) Service Manual online
AR-C170M PRINTER CONTROLLER SECTION 14 - 22
5) At the end, check that the printed color balance check patch is
within the following specifications.
The print density is gradually changed from the lower area to the
higher area without reversing of the change direction.
higher area without reversing of the change direction.
The density level of each color is virtually same.
Patch B may not be printed.
The performance of the color balance adjustment can be checked
more precisely by printing the color balance adjustment sheet with
SIM 67-25 and comparing the black patch color balance of each
process (CMY) with the black patch.
more precisely by printing the color balance adjustment sheet with
SIM 67-25 and comparing the black patch color balance of each
process (CMY) with the black patch.
11. AR-EB8 (Scanner function)
A. AR-EB8 (Scanner function)
The scanner function is enabled by canceling the product key.
This function requires installation of an expansion memory of
256MB and a scanner expansion board.
This function requires installation of an expansion memory of
256MB and a scanner expansion board.
(1) PUSH SCAN
PUSH SCAN is used to send scan data to PC or a file server by
the operation on the machine operation panel.
the operation on the machine operation panel.
PUSH SCAN has the following three modes:
• SCAN TO E-MAIL (SMTP)
∗
Scan data area attached to an E-mail.
• SCAN TO FILE SERVER (FTP)
Scan data are sent to a file server by FTP.
The URL can be e-mailed simultaneously.
• SCAN TO DESKTOP (FTP)
Scan data are sent to the desktop user. (Sharpdesk and the net-
work scanner tool are required.)
work scanner tool are required.)
∗
:
The SCAN TO E-MAIL function is available, but broadcast
communication with FAX cannot be used.
communication with FAX cannot be used.
a. Operation flow (PUSH SCAN)
1.
Push [IMAGE SEND] button on the operation panel to switch
to the main menu of the image send mode.
to the main menu of the image send mode.
2.
Push [SCANNER
↔
FAX] switch button to select [SCANNER].
3.
Press [DESTINATION LIST] or [E-MAIL ADDRESS] button to
set a destination. (The local address book cannot be
retrieved.)
set a destination. (The local address book cannot be
retrieved.)
4.
According to the necessity, set the sender with [SENDER
LIST] button.
LIST] button.
5.
According to necessity, select the scanning conditions with
[DENSITY], [IMAGE QUALITY], [FORMAT], AND [DOCU-
MENT] buttons.
[DENSITY], [IMAGE QUALITY], [FORMAT], AND [DOCU-
MENT] buttons.
6.
Press the color start key or the black-and-white start key to
start scanning. When the color start key is pressed, scanning
is made in color. When the black-and-white start key is
pressed, scanning is made in black and white.
start scanning. When the color start key is pressed, scanning
is made in color. When the black-and-white start key is
pressed, scanning is made in black and white.
7.
When it takes a considerable time for sending, the progress
status is displayed.
status is displayed.
b. Basic operations (PUSH SCAN)
Max
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
C
M
Y
Bk
1) The max. density
section is not blurred.
section is not blurred.
3) Patch for each of C, M, Y, BK
• The patch density is identical between patches or not reversed.
• The patch density is changed gradually.
• The patch density is changed gradually.
2) Patch C or D of each of Y, C, M,
and BK is very slightly copied.
and BK is very slightly copied.
High density
Low density
Fig. 1 PG image
Max
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
C
M
Y
Bk
1) The max. density section is not blurred.
4) Patch for each of C, M, Y, BK
• The patch density is identical between patches or not reversed.
• The patch density is changed gradually.
• The patch density is identical between patches or not reversed.
• The patch density is changed gradually.
3) Patch C or D of each of Y, C, M,
and BK is very slightly copied.
and BK is very slightly copied.
High density
Low density
CMY
mixed
color
mixed
color
Network protocol
TCP/IP, SMTP, FTP, (HTTP)
Trial mode required
(AR-EB8)
(AR-EB8)
Supported by the service diag.
The upper limit is 500 scans (surfaces). Without canceling the product key, scanning functions are enabled.
500 counts in total of color and black-and-white scans.
There is no counter for trial. If the memory capacity is small, restrict the resolution.
The upper limit is 500 scans (surfaces). Without canceling the product key, scanning functions are enabled.
500 counts in total of color and black-and-white scans.
There is no counter for trial. If the memory capacity is small, restrict the resolution.
Destination registration
500 items of scan to E-mail from Embedded Web Server + group, and 100itmes of Scan to FTP + Desktop
(Max. 600 items can be registered.)
Scan to E-mail only can be registered from the operation panel.
A destination name can be set with max. 18 characters in two bytes (or 36 characters in one byte).
An E-mail address can beg set with max. 50 characters in one byte.
(Max. 600 items can be registered.)
Scan to E-mail only can be registered from the operation panel.
A destination name can be set with max. 18 characters in two bytes (or 36 characters in one byte).
An E-mail address can beg set with max. 50 characters in one byte.
Address book
The static address book stored in MFP is supported.
Destination sorting is performed in the tab. (Sort sequence: retrieval text + destination name)
Destination sorting is performed in the tab. (Sort sequence: retrieval text + destination name)
Destination select
Selected from the operation panel.
Selection of two or more destinations is allowed. (Only Scan to E-mail)
Sending to temporary users can be made.
CC: / BCC: Send enable
Selection of two or more destinations is allowed. (Only Scan to E-mail)
Sending to temporary users can be made.
CC: / BCC: Send enable
Sender select
Select from the list of senders (20) on the operation panel.
If it is not set, the default which is set by Web is used.
Setting can be made from the key operator program.
If it is not set, the default which is set by Web is used.
Setting can be made from the key operator program.
Click on the first or last page to see other AR-C170 (serv.man31) service manuals if exist.