Read Sharp AR-C170 (serv.man26) Service Manual online
AR-C170M SIMULATION 9 - 14
[When RSPF is installed]
(Sensors to be detected)
[When the sorter is installed]
During the load operation, the [EXECUTE] key and the load key
are highlighted. Under this state, pressing the [EXECUTE] key
interrupts the load operation.
are highlighted. Under this state, pressing the [EXECUTE] key
interrupts the load operation.
(Loads to be selected)
(When the sorter is installed)
2
-3
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operations of the motors,
solenoids, and the PS clutch in the document feeder
unit.
solenoids, and the PS clutch in the document feeder
unit.
Section
Automatic document feeder
Item
Operation
Operation/
Procedure
Procedure
1. The names of the loads that can be operated are
displayed. Select the load to be checked with the
key, and the selected load is highlighted.
key, and the selected load is highlighted.
2. Press the [EXECUTE] key.
MOT
Motor
PSOL
Paper feed solenoid
RSOL
Paper reverse solenoid
GSOL
Paper exit fate solenoid
CLH
PS clutch
3
3
-2
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operations of the sensors and
detectors in the finisher and the related circuits.
detectors in the finisher and the related circuits.
Section
Finisher
Item
Operation
Operation/
Procedure
Procedure
The operating status of the sensors and detectors of
the finisher is displayed. The active sensor/detector
display is highlighted.
the finisher is displayed. The active sensor/detector
display is highlighted.
FES
Inlet sensor
FPHPS
Paddle HP sensor
FARHPS
Bundle roller HP sensor
FFJHPS
Alignment HP sensor (F)
FRJHPS
Alignment HP sensor (R)
FAS
Alignment tray sensor
FOBHPS
Paper exit belt HP sensor
FBES
Tray paper sensor
FSLS
Paper surface sensor
FFPS
Binding position sensor
FFHPS
Binding HP sensor
FFRHPS
Binding roller HP sensor
FFES
Binding paper sensor
FFE
Binding clock sensor
FULS
Lift upper limit sensor
FLLS
Lift lower limit sensor
FLE
Lift clock sensor
FSHPS
Slide HP sensor
FSTHPS
Stapler HP sensor
FSS
Staple sensor
FSUC
Stapler connection sensor
FMLS
Lift middle sensor
FSPS
Self prime sensor
FFDS
Front door sensor
FCS
Upper cover sensor
FFDSW
Front door switch
FJS
Joint switch
FSSS
Stapler safety switch
FPTS
Punch timing sensor
FPSS1
Punch side resist sensor 1
FPSS2
Punch side resist sensor 2
FPSS3
Punch side resist sensor 3
FPSS4
Punch side resist sensor 4
FPDS
Punch dust sensor
FPUC
Punch connection
FPSHPS
Punch side resist home position
FPE
Punch motor encoder
SBPED
Sensor in bin
SLDHP
Lead cam HP sensor
SGBHP
Guide bar HP sensor
SBUHP
Bin unit HP sensor
SPPD
Paper exit sensor
SJSW
Joint switch
SPSW2
Push switch 2
SPSW3
Push switch 3
SDIPSW1
DIP switch (SW1)
SDIPSW2
DIP switch (SW2)
SDIPSW3
DIP switch (SW3)
SDIPSW4
DIP switch (SW4)
SDIPSW5
DIP switch (SW5)
SDIPSW6
DIP switch (SW6)
3
-3
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the loads in the finisher and the
control circuit.
control circuit.
Section
Finisher
Item
Operation
Operation/
Procedure
Procedure
1. The names of the loads that can be checked are
displayed. Select a load to be checked with the
key.
key.
2. Press the [EXECUTE] key. The selected load
operates.
FFM
Transport motor
FFSM
Stapler motor
FPM
Paddle motor
FLM
Shift motor
FAM
Bundle exit motor
FPNM
Punch motor
FFJM
Alignment motor (F) FPSM
Puncher side resist motor
FRJM
Alignment motor (R) FFC
Folding clutch
FSM
Slide motor
SBSM
Bin unit shift motor
SPFM
Transport motor
SGBM
Guide bar drive motor
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.