Read Sharp AR-C170 (serv.man26) Service Manual online
AR-C170M SIMULATION 9 - 10
51
1
Used to adjust the transfer voltage
ON timing.
ON timing.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Transfer
Operation
2
Used to adjust the contact pressure
of paper on the resist roller of each
section (each paper feed and duplex
feed of the copier).
(This adjustment is required when
the print image position variations
are considerably great or when
paper jams occur frequently.)
of paper on the resist roller of each
section (each paper feed and duplex
feed of the copier).
(This adjustment is required when
the print image position variations
are considerably great or when
paper jams occur frequently.)
Adjustment
Paper transport (Paper
exit, switchback,
transport)
exit, switchback,
transport)
Operation
52
1
Used to adjust the duplex print mode
stacking capacity (Used to adjust the
stop position of the duplex unit paper
tray width alignment plate. The
home position of the width alignment
plate is changed by software.)
stacking capacity (Used to adjust the
stop position of the duplex unit paper
tray width alignment plate. The
home position of the width alignment
plate is changed by software.)
Adjustment
Duplex
Operation
53
8
Used to adjust the document feeder
unit document scanning position.
unit document scanning position.
Adjustment
Automatic document
feeder
feeder
Operation
60
1
Used to check the operation of ICU
PWB image DRAM read/write.
PWB image DRAM read/write.
Operation test/check
ICU (Memory)
Operation
2
Used to set the onboard SRAM.
Setting
SDRAM
61
4
Used to adjust the scanner (writing)
unit (LED array unit) skew.
unit (LED array unit) skew.
Adjustment
Scanner (writing)
Operation
63
1
Used to check the result of shading
correction. (The shading correction
data are displayed.)
correction. (The shading correction
data are displayed.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Scanner (Exposure)
Operation
3
Used to adjust the CCD color
balance (gamma).
balance (gamma).
Adjustment
Scanner (reading)
Picture quality
Color balance
5
Used to set the CCD color balance
(gamma) default.
(gamma) default.
Setting
Scanner (reading)
Picture quality
Color balance
6
Used to check the color balance
(gamma) check patch.
(gamma) check patch.
Adjustment/Operation
data output check
(display, print)
data output check
(display, print)
Image process (ICU)
Picture quality
Color balance
7
Used to set the target color balance
(gamma) for auto color balance
adjustment. The standard color
balance (gamma) or an optional
color balance (gamma) is set as the
service target.
(gamma) for auto color balance
adjustment. The standard color
balance (gamma) or an optional
color balance (gamma) is set as the
service target.
Setting
Image process (ICU)
Picture quality
Color balance
8
Used to set the service target of the
automatic color balance adjustment
(SIM 46-24) and the automatic color
balance adjustment target of the key
operator program to the same
balance as the factory target of the
automatic color balance adjustment
(SIM 46-24).
automatic color balance adjustment
(SIM 46-24) and the automatic color
balance adjustment target of the key
operator program to the same
balance as the factory target of the
automatic color balance adjustment
(SIM 46-24).
Setting
Scanner (reading)
Picture quality
Color balance
9
Used to adjust the CCD gamma
(CCD calibration) (copy document
mode).
(CCD calibration) (copy document
mode).
Setting
Scanner (reading)
Picture quality
Color balance
10
Used to set the copy document
mode color balance (gamma)
default.
mode color balance (gamma)
default.
Setting
Scanner (Image
scanning)
scanning)
Picture quality
Color balance
11
Used to set the factory color balance
in the automatic color balance
adjustment (SIM 46-24).
in the automatic color balance
adjustment (SIM 46-24).
Setting
Scanner (reading)
Picture quality
64
1
Used to adjust the operations of the
printer section (self-print operation/
color). (The print pattern, paper feed
mode, print mode, print quantity, and
density can be changed optionally.)
printer section (self-print operation/
color). (The print pattern, paper feed
mode, print mode, print quantity, and
density can be changed optionally.)
Operation test/check
Printer
Operation
2
Used to print the color patch image
(adjustment pattern). The above
color patch image (adjustment
pattern) is outputted according to the
currently adjusted color balance
(gamma). Use SIM 63-7 to read the
color patch image (adjustment
pattern), which can be used as the
service target of the automatic color
balance (gamma) adjustment.
(adjustment pattern). The above
color patch image (adjustment
pattern) is outputted according to the
currently adjusted color balance
(gamma). Use SIM 63-7 to read the
color patch image (adjustment
pattern), which can be used as the
service target of the automatic color
balance (gamma) adjustment.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Printer
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.