AR-505 (serv.man9). AR505 Service Manual-Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 37

Purpose

Adjustment

Function
(Purpose)

Used to adjust the print density for each density level
(display value) in the copy mode (multi Auto mode).
An arbitrary print density can be set for each density
level (display value). (AR-250/280/285/330/335 only)
(Japan only)

Item

Picture quality

Density

Operation/
Procedure

1. Select the density level with the density adjustment

key.
(The selected value is highlighted.)

2. Enter the adjustment value with the 10-key.

3. Press the ENTER key or the PRINT button.

(The value entered in procedure 2 is set.)

When the PRINT button is pressed, copying is performed.
To customize the print density for the density level display value
according to the user’s request, use this simulation.

Default: 100

Purpose

Adjustment

Function
(Purpose)

Used to adjust the print density for each density level
(display value) in the copy mode (multi value-character,
photo mode). 
An arbitrary print density can be set for each density
level (display value). (AR-250/280/285/330/335 only)
(Japan only)

Item

Picture quality

Density

Operation/
Procedure

1. Select the density level with the density adjustment

key.
(The selected value is highlighted.)

2. Enter the adjustment value with the 10-key.

3. Press the ENTER key or the PRINT button. (The value entered

in procedure 2 is set.)

When the PRINT button is pressed, copying is performed.
To customize the print density for the density level display value
according to the user’s request, use this simulation.

Default: 100

Purpose

Adjustment

Function
(Purpose)

Used to adjust the print density for each density level
(display value) in the copy mode (multi value - photo
mode).
(Japan only)

Item

Picture quality

Density

Operation/
Procedure

1. Select the density level with the density adjustment

key. (The selected value is highlighted.)

2.  Enter the adjustment value with the 10-key.

3.  Press the [ENTER] key or the [PRINT button]. (The value en-

tered in procedure 2 is set.)

When the [PRINT button] is pressed, copying is performed.
To customize the print density for the density level display value
according to the user’s request, use this simulation.

Default: 100

Purpose

Adjustment

Function
(Purpose)

Used to adjust the print density for each density level
(display value) in the copy mode (binary - character
mode). 

Item

Picture quality

Density

Operation/
Procedure

1. Select the density level with the density adjustment

key.
(The selected value is highlighted.)

2. Enter the adjustment value with the 10-key.

3. Press the ENTER key or the PRINT button. (The value entered

in procedure 2 is set.)

When the PRINT button is pressed, copying is performed.
To customize the print density for the density level display value
according to the user’s request, use this simulation.

Default: 100

Purpose

Adjustment

Function
(Purpose)

Used to adjust the print density for each density level
(display value) in the copy mode (binary - character,
photo mode).
An arbitrary print density can be set for each density
level (display value).

Item

Picture quality

Operation/
Procedure

1. Select the print mode with [

↑

], [

↓

] keys.

(The set value is highlighted.)

2. Enter the adjustment value with the 10-key.

3. Press the [OK] key or the PRINT button. (The value entered in

procedure 2 is set.)
When the PRINT button is pressed, copying is performed.

To customize the print density in each mode according to the
user’s request, use this simulation to adjust the print density.

Default: 100

AR-505

8/6/1999

7 – 36