Read Sharp AR-280 (serv.man12) Service Manual online
65
65 - 1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the touch panel (LCD display) detecting position.
Section
Operation (Display/Operation key)
Item
Operation/
Procedure
Procedure
Touch the four cross marks.
The coordinates at the pressed point are set.
When the coordinates are properly set, the display turns to gray and returns to the simulation sub code entry
screen.
In case of an abnormality, it returns to the input display.
The coordinates at the pressed point are set.
When the coordinates are properly set, the display turns to gray and returns to the simulation sub code entry
screen.
In case of an abnormality, it returns to the input display.
Note
65 - 2
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the result of the touch panel (LCD display) detecting position adjustment. (The coordinates are
displayed.)
displayed.)
Section
Operation (Display/Operation key)
Item
Operation/
Procedure
Procedure
When the touch panel is pressed, the AD value in each of X and Y directions at that point and the coordinate
values are displayed in ( ) as well as the coordinate values of each point.
It is based on the coordinates set with SIM 65-1.
values are displayed in ( ) as well as the coordinate values of each point.
It is based on the coordinates set with SIM 65-1.
Note
8 – 114
Click on the first or last page to see other AR-280 (serv.man12) service manuals if exist.